So I finally was able to convince swmbo that I needed a bigger kegerator :biggrin:
So two very grumpy lowes employees dropped off my freezer yesterday and I went right to work getting a fermtroller working for it.
So here on the left you see a standard outdoor outlet box with one of our single relay boards mounted into the back of it. The larger cable is of course the 120V going to a plug and the other smaller line is the control wire for the relay.
On the right is the brewtroller 3.3 board mounted inside with an LCD. The connectors on the bottom are Power IN - Relay Control Out - Temp Probe Connection
Still need to get a SS probe end from Derrin for the temp probe.
So two very grumpy lowes employees dropped off my freezer yesterday and I went right to work getting a fermtroller working for it.
So here on the left you see a standard outdoor outlet box with one of our single relay boards mounted into the back of it. The larger cable is of course the 120V going to a plug and the other smaller line is the control wire for the relay.
On the right is the brewtroller 3.3 board mounted inside with an LCD. The connectors on the bottom are Power IN - Relay Control Out - Temp Probe Connection
Still need to get a SS probe end from Derrin for the temp probe.