Just got done putting the final touches on my kegarator and testing it out. Everything is working perfectly. Don't know if I have the patience to wait ~3 weeks for my first beers to be ready to keg.
Couple of things I'd do different. First is I mounted the temp probe on the side opposite of the compressor hump. If I were to do it over again I'd mount it on the same side as the hump as it would be easier to get the probe in a spot where it isn't touching anything.
The other thing is that I didn't leave enough slack in the air line going from the regulator to the distributor in order to set the regulator on the bottom of the kegarator when it's disconnected. Minor inconvinence that I could easily fix but I'm out of hose and to lazy to go get more.
Couple of things I'd do different. First is I mounted the temp probe on the side opposite of the compressor hump. If I were to do it over again I'd mount it on the same side as the hump as it would be easier to get the probe in a spot where it isn't touching anything.
The other thing is that I didn't leave enough slack in the air line going from the regulator to the distributor in order to set the regulator on the bottom of the kegarator when it's disconnected. Minor inconvinence that I could easily fix but I'm out of hose and to lazy to go get more.