I'm in the midst of converting a Sabco Brew Magic to electric and I have several holes to cut in the kegs for various couplings, tri-clover ferrules, etc and it seems one method of getting these holes cut in a clean fashion without making hole saws disposable is by using knockout punches.
I have one set, a conduit set, 7238BB and that goes from 1/2" to 2" for conduit. I'm looking to get a 39860 set which makes standard holes from 3/4" to 1.5".
With the money invested in these, I'm wondering if anyone on the forum would be willing to throw me a few bucks plus shipping to borrow the sets. They should fit in a $10.95 Priority Flat Rate box.
I have 6 holes to cut into my kegs and at nearly $285 for the set of standard punches, $47.50/hole is pretty steep. I also need to cut the holes in my enclosure for the switches.
If you're interested in borrowing a set for like $30 shipped, post here and if I get enough of a response, I'll probably buy the other set. If not, I'll call a few shops to see if they'll do the work for me.
I'm thinking we could get a list going and send it from member to member in order of the list. First person paypals me $30 and the kit is shipped. When finished, the next person on the list paypals the shipping funds to the person who has the kit and paypals me the other $19. If you only need or two punch sizes, we can work that out.
Maybe I'm setting myself up for failure with lost/destroyed tools, I just figured we could help each other out as I don't have much use for these tools once I'm done with my e-Brew Magic build.
Let me know.
I have one set, a conduit set, 7238BB and that goes from 1/2" to 2" for conduit. I'm looking to get a 39860 set which makes standard holes from 3/4" to 1.5".
With the money invested in these, I'm wondering if anyone on the forum would be willing to throw me a few bucks plus shipping to borrow the sets. They should fit in a $10.95 Priority Flat Rate box.
I have 6 holes to cut into my kegs and at nearly $285 for the set of standard punches, $47.50/hole is pretty steep. I also need to cut the holes in my enclosure for the switches.
If you're interested in borrowing a set for like $30 shipped, post here and if I get enough of a response, I'll probably buy the other set. If not, I'll call a few shops to see if they'll do the work for me.
I'm thinking we could get a list going and send it from member to member in order of the list. First person paypals me $30 and the kit is shipped. When finished, the next person on the list paypals the shipping funds to the person who has the kit and paypals me the other $19. If you only need or two punch sizes, we can work that out.
Maybe I'm setting myself up for failure with lost/destroyed tools, I just figured we could help each other out as I don't have much use for these tools once I'm done with my e-Brew Magic build.
Let me know.