dummkauf
Well-Known Member
Ok, so I've got a big CO2 tank, and have been troubleshooting this for a while now. I thought I had a leak somewhere since the tank would empty after a couple of months(2-3), so it's atleast a small leak. Anyway, after refilling again yesterday, I started digging. I'd previously checked all my hoses and connections with soapy water, and the regulator's connections(threads, hose outlet, etc...). Couldn't find anything, so I finally just splashed the whole regulator with soapy water.....and I finally got a bubble!
But, I'm not sure if it's supposed to be doing that or not. The bubble is coming out of a small hole underneath the screw I use to set pressure. I have a double regulator and only the regulator on the left does this, if I cover that hole on the right one with soapy water, I get no bubbles, so I'm guessing there shouldn't be gas(air???) coming out of that hole on the left one.
So now the question is, how do I go about fixing this? Anyone know?
But, I'm not sure if it's supposed to be doing that or not. The bubble is coming out of a small hole underneath the screw I use to set pressure. I have a double regulator and only the regulator on the left does this, if I cover that hole on the right one with soapy water, I get no bubbles, so I'm guessing there shouldn't be gas(air???) coming out of that hole on the left one.
So now the question is, how do I go about fixing this? Anyone know?