Problem: Nothing but foam coming out of my picnic tap
Details: I got a 4-way Co2 Distributor for Christmas so I would not have to keep switching the gas when I have more than one keg in my fridge and eventual would like to get a BeerGun. I have about a foot and a half 1/4 beverage tubing going from the Co2 tank to the distributor and about three or four feet going from the Co2 Distributor to the keg. The picnic tap is 5 feet of 3/16 tubing. My normal process is to set the keg around 20 to 25 psi for two days and then back it down to around 5 to 8psi for serving. This has worked well for many years but now that I've set up the Co2 Distributor the flow is very slow and all foam.
What can I do to correct this?
Thanks!
Details: I got a 4-way Co2 Distributor for Christmas so I would not have to keep switching the gas when I have more than one keg in my fridge and eventual would like to get a BeerGun. I have about a foot and a half 1/4 beverage tubing going from the Co2 tank to the distributor and about three or four feet going from the Co2 Distributor to the keg. The picnic tap is 5 feet of 3/16 tubing. My normal process is to set the keg around 20 to 25 psi for two days and then back it down to around 5 to 8psi for serving. This has worked well for many years but now that I've set up the Co2 Distributor the flow is very slow and all foam.
What can I do to correct this?
Thanks!