Recent content by Azrack

So after several years on propane I decided to go all electric. I already purchased several pieces of the system and admittidly have a few questions. Going to do a single element 4500w with a single pump. Switched PID, Element, and Pump outlet. The real question I have is could I...

shildebr what automotive relay did you use please?

southern pipe you should have one local to you they stock 3 way ball valves in red and white brand or apollo brand / discover valve online

Android thanks for the response I did some digging and found the manf. and model # it looks like its gtg http://www.iecworld.com/ym/index.php?TabId=7&pid=10762

Not to hijack the thread but would this aqua temp controller work for a 22cf deep freezer? http://www.fish-street.com/temperature_controller_10a?category_id=49 Thanks, Az~

if its powering and not kicking on check the compressor for power if its hot check it for freon if its got that and its hot it might be locked up.

are they water hose QD's? got link? Be awesome if they work.

I say go copper its cheaper then stainless and conducts heat better then the brew hose

I drilled all mine with a 1" bit once locked down they dont move.

I wouldn't do it. Why not build a box underneath it to hold the compressor?

Not to hijack but since this is a thread on welding questions. How bad an idea would it be to MIG weld a coupler in with triple gas for shielding?

Someone once suggested use it as a guard for a liquid level gauge. I like the idea of a mash paddle. Spoon?

Short answer. Get another cooler if it cracked then the plastic has probably gone brittle and now that you melted it you changed it. Save the heart-arche imo buy a new one.

Sorry for the delay in response thanks for the ideas and opinions I guess we start hunting for a freezer I didn't go with a chest freezer because I didn't want people having to lift 50lbish kegs up and in. Down here in hunting/fishing country freezers are always costly or hard to catch so I...

Well the plan in my mind was to have the mini under tha bar it would not be a walk in but built like one. It would be under that bar with the bar top being standard height. It would be large enough for 4-6 kegs and the taps would come out directly above.