Just an FYI. I tied into the wiring just below the computer panel which worked great. I then tried to mount the Love controler in centered above the stock panel. Do NOT do this. Mount the Love left justifed with the left side of the stock pannel, or the contoler will hit the left side of the freezer's wall. By left justified I mean the outer shell of the Love controller that you see which is 96mm wide, not the inserted guts that is 71mm wide. This is still extremely close. In my case I had to enlarge the hole I put in the outside and then make a beauty gasket out of 1/4" black PVC.