New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > May have made a mistake




Reply
 
LinkBack Thread Tools Display Modes
Old 12-07-2012, 03:04 PM   #1
chris2307
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2012
Posts: 3
Default May have made a mistake

Hi all,

I am new to home brewing and am currently on my second brew so still using the basic methods until I can learn more about it and start experimenting.

During my previous batch, I siphoned the beer out from the primary fermenter in to a pressure barrel on day 5. This was what the instructions told me. The batch came out okay, it was drinkable and quite pleasant.

Today, I repeated the same stage, siphoning off the liquid from the fermenting bucket to the pressure barrel. It has also been 5 days (I started it this time last Sunday). However, this time, I noticed half way through siphoning that there were still some bubbles coming to the surface so I then knew the fermentation hadn't stopped.

Now, I know I should have been really careful and there is no excuse for not seeing this before I started siphoning. I am not sure why I didn't check (Mixture of excitement, tiredness, lack of experience I imagine!)

Anyway, my question is this, do you think it will be okay? I had a quick read of the forums and people are saying they like to leave their liquid in the primary fermenter for up to three or four weeks!

I just wanted my beer ready in time for xmas!

Chris



__________________
chris2307 is offline
 
Reply With Quote Quick reply to this message
Old 12-07-2012, 03:14 PM   #2
progmac
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2012
Location: Cincy, OH
Posts: 1,537
Liked 175 Times on 142 Posts
Likes Given: 250

Default

can you check the gravity and report back?



__________________

на здравје!

progmac is offline
 
Reply With Quote Quick reply to this message
Old 12-07-2012, 03:15 PM   #3
rodwha
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: San Antonio, Texas
Posts: 2,194
Liked 70 Times on 66 Posts
Likes Given: 27

Default

CO2 gets trapped in the yeast cake, and very well could have been what you were seeing.
But 5 days really isn't enough time to really get it done well. Major fermentation is most likely over in about that time, but if you give it longer the yeast go back and eat up the things they created while eating the sugars. This is what makes the beer taste better. The things they created aren't great.

__________________
Quote:
Originally Posted by Revvy View Post
...tasting a beer at 1 week, and again at 2....that to me just means there 2 less beers that are actually tasting good and are ready at the end.
"Anyway on the wall was this sign. People who drink light beer don't really like beer. They just like to piss a lot."

"Were I to leave where else would I go? Your words of life and of truth You hold." - Third Day
rodwha is offline
 
Reply With Quote Quick reply to this message
Old 12-07-2012, 03:19 PM   #4
JordanThomas
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2012
Location: Grand Rapids, Michigan
Posts: 889
Liked 80 Times on 76 Posts
Likes Given: 426

Default

Bubbles only indicate that gas is being exchanged. Gravity readings are the only way to determine if fermentation is still going on or complete.

__________________
JordanThomas is offline
 
Reply With Quote Quick reply to this message
Old 12-07-2012, 03:20 PM   #5
chris2307
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2012
Posts: 3
Default

Okay, thank you. Your reply suggests it won't be a total disaster!

I am also left feeling quite optimistic for my third brew because if my first brew tasted nice to me, then taking on board these tips will make the third taste even nicer!

The trouble I have is that I use a plastic bucket for my primary fermentation. I cannot see inside which is a pain as I cannot asses whether it is fermenting or not. I am also reluctant to open the lid because I have been told that this can make the beer taste vinegary. Which is why I have just been leaving it 5 days and going to the pressure barrel with fingers crossed!

__________________
chris2307 is offline
 
Reply With Quote Quick reply to this message
Old 12-07-2012, 03:31 PM   #6
BoomerHarley
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2012
Location: oakland, ca
Posts: 209
Liked 59 Times on 40 Posts
Likes Given: 22

Default

5 days is not long enough. leave it in there for at least two weeks.

__________________
BoomerHarley is offline
 
Reply With Quote Quick reply to this message
Old 12-07-2012, 03:41 PM   #7
kh54s10
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Tiverton, Rhode Island
Posts: 5,951
Liked 483 Times on 408 Posts
Likes Given: 129

Default

I'm not sure what your kit consists of but keep researching. You will find that there are many ways to achieve good results.

My main suggestion is to get a hydrometer, learn how and when to use it and progress beyond the simple kits that give the most simplified (and often wrong or misleading) instructions.

5 days of primary fermentation is often way to short. I have had many beers that didn't finish until around 10 days.

__________________
kh54s10 is offline
 
Reply With Quote Quick reply to this message
Old 12-07-2012, 03:48 PM   #8
Unibrow
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Cleveland, OH
Posts: 445
Liked 9 Times on 7 Posts
Likes Given: 9

Default

Quote:
Originally Posted by BoomerHarley View Post
5 days is not long enough. leave it in there for at least two weeks.
what he said...
__________________

I'm trying to catalog every brew online so I don't have to keep notes all over the house. Check it out on my blog site below:

http://brewzak.wordpress.com/

Unibrow is offline
 
Reply With Quote Quick reply to this message
Old 12-07-2012, 03:49 PM   #9
chris2307
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2012
Posts: 3
Default

Yes, after Christmas, I intend to get some better kit. The pressure barrel is fine but the primary fermenter isn't.

Cheers for the replies, I will just keep my fingers crossed that this batch comes out OK (As my last batch did)

__________________
chris2307 is offline
 
Reply With Quote Quick reply to this message
Old 12-07-2012, 03:49 PM   #10
rodwha
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: San Antonio, Texas
Posts: 2,194
Liked 70 Times on 66 Posts
Likes Given: 27

Default

Seeing it won't tell you if it's done either. As has been stated the only way to know is to take a hydrometer reading.

I give my wheat beers 2-3 weeks to ferment and these work fast. Others I give 3-4 weeks.



__________________
Quote:
Originally Posted by Revvy View Post
...tasting a beer at 1 week, and again at 2....that to me just means there 2 less beers that are actually tasting good and are ready at the end.
"Anyway on the wall was this sign. People who drink light beer don't really like beer. They just like to piss a lot."

"Were I to leave where else would I go? Your words of life and of truth You hold." - Third Day
rodwha is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Made a batch of mead...made a mistake with the yeast Sourcheese Mead Forum 1 03-28-2012 12:01 AM
Made a Mistake Rockweezy Equipment/Sanitation 2 08-28-2009 06:12 AM
I think i made a mistake... bass2187 Beginners Beer Brewing Forum 3 10-12-2008 07:41 PM
OH NO - made a big mistake brrman Extract Brewing 18 04-28-2008 08:01 PM
I made a mistake... Of_Beer General Beer Discussion 1 02-13-2006 06:39 PM