B beerloin Well-Known Member Joined Jan 15, 2010 Messages 120 Reaction score 0 Location Hebron, Ct Feb 25, 2010 #1 If i force carbed at 12psi (set and forget) and then i turned down my PSI to 6-8 to serve, will my beer become flatter as I continue to serve?
If i force carbed at 12psi (set and forget) and then i turned down my PSI to 6-8 to serve, will my beer become flatter as I continue to serve?
GilaMinumBeer Half-fast Prattlarian HBT Supporter Joined Jan 23, 2008 Messages 65,431 Reaction score 10,793 Feb 25, 2010 #2 Yes. The whole point to set and forget is to set, and forget. Balance your lines to the set pressure and leave the regulator alone.
Yes. The whole point to set and forget is to set, and forget. Balance your lines to the set pressure and leave the regulator alone.
J Jipper Well-Known Member Joined Dec 2, 2008 Messages 497 Reaction score 44 Feb 25, 2010 #3 It will eventually equalize with the PSI going into the system, yes. And it will foam for a bit too, as the 12 PSI comes out of solution, since it doens't have 12 PSI coming in to keep the C02 in the beer.
It will eventually equalize with the PSI going into the system, yes. And it will foam for a bit too, as the 12 PSI comes out of solution, since it doens't have 12 PSI coming in to keep the C02 in the beer.