Meeeky90
New Member
- Joined
- Jun 4, 2013
- Messages
- 4
- Reaction score
- 9
Received a free keg and I took advantage of it. I wanted to get into 10 gal batches and Since I'm a wood worker I decided the best way to insulate my new mash tun was with some quarter sawn red oak in my wood shed. I used hot water heater insulation and taped it tightly against the keg In between the ridges of the keg. I figured the degree of the bevel I needed for my wood rips was 8 degrees and cut all the oak wood slats. Strapped it together with motorcycle straps to hold the wood into place and then fastened three metal bands that I secured with screws. Can't wait to use it!!!!