Wiring diagram for STC-1000 with two outlets and indicator lights?

[smithabusa]

you need to have the controller trying to heat or cool, the little LED's on the STC1000 if they aren't requesting heat or cool nothing will happen. What is your setpoint set to? If its not below or above the temp in the garage nothing would happen.

 

[eelgerg]

Controller was trying to cool....... From what I could see. Set point was whatever comes out of the box: 10 deg C I think?

I will have another look at it tonight and send pics if it is of any help.

 

[smithabusa]

If you can't figure it out you can ship it to me and ill get it going for you

 

[eelgerg]

That is a very generous offer! I am determined to learn this and am going to make a really big effort to fix this. Plus I am in Canada and shipping alone might cost the same as buying your unit!

 

[day_trippr]

Perhaps going through the settings and listing them here someone might spot the issue...

Cheers!

 

[eelgerg]

She works!!!!!

View attachment ImageUploadedByHome Brew1419362238.000748.jpg
View attachment ImageUploadedByHome Brew1419362258.107510.jpg

The issue was the F3 delay time - that is why the power to the outlet was not working!!!!

I changed it to 1 min for the test, and both hot and cold work great!

Thanks everyone for your help with this. This forum rules and I hope I can pay it back in the future.

Now I just need a freezer.....

 

[eelgerg]

I should probably modify the thread. (If I knew how) because I didn't install two outlets like I said I would. Oh well - plans change! I still have that as an option in the future if I want to. I can just add the second outlet on the other side and replace the existing outlet since I broke the bridge.

 

[MarkO22]

Have a? About this wiring diagram. Am I correct in the neutral wires for the heating and cooling outlets are being connected to the silver set screws and the red and blue wires are being connected to the gold screws. Any help would be greatly appreciated

 

[MarkO22]

Didn't know how to add diagram in my post it was the one with the 2 outlets and led lights

 

[The10mmKid]

That is correct MarkO.
Make sure to break the tab between the two gold screws.

Have a? About this wiring diagram. Am I correct in the neutral wires for the heating and cooling outlets are being connected to the silver set screws and the red and blue wires are being connected to the gold screws. Any help would be greatly appreciated

 

[MarkO22]

Wired it up thus afternoon and everything seems to be working as it should. Green led comes on when calling for cooling. Red comes on when calling for heat. Now to actually get a freezer and put it to the test. 10mmKid I did not break the gold tabs. Is that going to screw me when I actually hook it up to the freezer?

 

[smithabusa]

if you didn't separate the two circuits they are likely both being turned on regardless if the call is for heat or cooling

 

[MarkO22]

if you didn't separate the two circuits they are likely both being turned on regardless if the call is for heat or cooling

http://cdn.homebrewtalk.com/attachm...imageuploadedbyhome-brew1418488291.327211.jpg

Just to be clear , cause I am In no way electrically inclined. The above diagram is what I wired up today. I still need to break the gold tabs on both sets of outlets? Thanks for your input Smithabusa and 10mmKid

 

[smithabusa]

Oh sorry if you have two separate outlets you are fine

 

[MarkO22]

Awesome !Thanks for your help Smithabusa. Much appreciated