ramthebuffs
Well-Known Member
- Joined
- Feb 5, 2009
- Messages
- 76
- Reaction score
- 2
I'd love a little help on this. I've got a 14# extension cord to use for the splicing to my digital a419 controller.
The controller has an input side 240 | com | 120.
And the output side NC | C | NO.
The diagram looks like hmm... Tough to say. Live line to the 120 then the 120 bridges to C and then the NO go's back out of the box. Neutral line to COM.
I don't remember what the standard colors for the wires are once I cut the extension cord open.
One last thing. Whats the better setting for the jumper for cooling.
There was a site with a decent diagram, but I guess its down now so I'm sorta stuck.
The controller has an input side 240 | com | 120.
And the output side NC | C | NO.
The diagram looks like hmm... Tough to say. Live line to the 120 then the 120 bridges to C and then the NO go's back out of the box. Neutral line to COM.
I don't remember what the standard colors for the wires are once I cut the extension cord open.
One last thing. Whats the better setting for the jumper for cooling.
There was a site with a decent diagram, but I guess its down now so I'm sorta stuck.