Belgian Samurai
Well-Known Member
- Joined
- Dec 15, 2020
- Messages
- 112
- Reaction score
- 33
Hi,
I have installed this new regulator per the instructions (my first time), but the pressure is dropping ever so slowly. I opened up the CO2 tank nozzle slowly and got the regulator pressure set to 12psi and locked that knob in place. The CO2 tank is wide open now. I made up a warm soapy cup of water and using Q-tips, swathed all of the threads and there are no bubbles, yet the regulator now shows 10psi within about 5 minutes.
Where should I be checking specifically? Or what tip would you give me to isolate this leak?
Thanks!
Belgian Samurai
I have installed this new regulator per the instructions (my first time), but the pressure is dropping ever so slowly. I opened up the CO2 tank nozzle slowly and got the regulator pressure set to 12psi and locked that knob in place. The CO2 tank is wide open now. I made up a warm soapy cup of water and using Q-tips, swathed all of the threads and there are no bubbles, yet the regulator now shows 10psi within about 5 minutes.
Where should I be checking specifically? Or what tip would you give me to isolate this leak?
Thanks!
Belgian Samurai