• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

What do you think for Converting Stand?

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BucksPA

Well-Known Member
Joined
Dec 3, 2009
Messages
451
Reaction score
5
Location
Bucks, PA
I am in design stages for my brutus clone (with mods) and am shopping stands. I found one that I think might be a good fit, with some mods. Take a look at the link and let me know your thoughts. I'd cut out 3 square holes for burners and reinforce the top with some cross bars welded underneath.

In a perfect world it would hold the weight with reinforcements, but I am definately welding some T bars across the frame to make of up for the support I am removing when i cut out square holes for the burners.

Stainless Steel is expensive. If i could get all the stainless steel for $300, i'd build from scratch. Anybody know any cheap dealers out there? I'm having a hard time finding suppliers online.

www.acitydiscount.com/Used-Restaurant-Kitchen-60-Stainless-Prep-Work-Utility-Table.0.104419.1.1.htm
 
That is a nice table. I would cut holes in the top and let the kettles sit on the bottom shelf. Then reinforce the bottom shelf. It would put the height of the kettles at a more usable level. Keeping the leftover areas on the top shelf for putting things on during brewing.
 
Why not just fabricate one out of carbon steel for a little of nothing. Steel prices are really low now. Keep some paint around and touch it up.
+1 I didnt have the cash for stainless so i bought 1.5" cheap steel and primed/primed/primed/ painted it.

I guess you could always paint it silver and tell everyone its stainless that you havnt polished yet..
 
Back
Top