What are you drinking now?

[Psylocide]

Actually, now I'm not so sure if I should continue to support these guys:

 

[wobrien]

This thread needs a beer

 

[wyobrewer1]

This thread needs a beer

Do it. Send out the Remmy signal.

 

[podz]

Do it. Send out the Remmy signal.

[ame]https://www.youtube.com/watch?v=jKofnVkUwBA[/ame]

 

[BUCKNUTS]

Coffee my sleep schedule is a disaster screw working nights
View attachment ImageUploadedByHome Brew1430837546.376431.jpg

 

[DrunkleJon]

Great, guess I have a timeout coming now...

Sit in the corner and not come out until I say so lol

Wait, I thought it was sit in the corner and drink a beer while you think about it. And if you are a repeat offender, you will have to emulate Remmy until you are smacked enough to get along.

or is this you?

Hey... so, what's everybody drinking now?

I'm drinking water, kind of boring.

Here's a picture.

Woah. I am drinking something similar. It is also a clear non-alcoholic liquid. Has no flavor or brand either, comes straight from a fountain. Wish it were beer.

 

[TheCADJockey]

 

[WesleyS]

Drinking water. Hey look at that I'm on topic.
I'm sincerely sorry for the debate/argument that followed my initial post last night about the dog attack. I'm done discussing it because I enjoy this thread and the company of those who participate in it too much to see it closed (again) by a mod for, of all things, a dog debate.
I appreciate all of you who expressed concern and well wishes for my family. Those of you who feel differently than I do or were offended by anything I said, I'm sorry, but, I value the safety of my family far more than the life of anything/anyone who wishes to do them harm or anyone's opinion or perception of me. And I hope you feel the same way for those you love.

 

[Qhrumphf]

Mountain Dew. Because win. But i hit the bottle shop again so there's that.

Also jack russel pug mix sounds ugly as hell. Then again pug anything mix.

I don't have a dog simply because I'm not allowed to where we live. But if when we move we're getting another dog.

Meanwhile two snotty cats is all i need.

 

[Remmy]

You rang?

Breakfast and a Conan DIPA
View attachment ImageUploadedByHome Brew1430838705.567476.jpg

 

[wyobrewer1]

Drinking water. Hey look at that I'm on topic.
I'm sincerely sorry for the debate/argument that followed my initial post last night about the dog attack. I'm done discussing it because I enjoy this thread and the company of those who participate in it too much to see it closed (again) by a mod for, of all things, a dog debate.
I appreciate all of you who expressed concern and well wishes for my family. Those of you who feel differently than I do or were offended by anything I said, I'm sorry, but, I value the safety of my family far more than the life of anything/anyone who wishes to do them harm or anyone's opinion or perception of me. And I hope you feel the same way for those you love.

My apologies as well. My post was meant to be comical, but was interpreted by some the wrong way. Glad your family is safe.

 

[wobrien]

Mountain Dew. Because win. But i hit the bottle shop again so there's that.

Also jack russel pug mix sounds ugly as hell. Then again pug anything mix.

I don't have a dog simply because I'm not allowed to where we live. But if when we move we're getting another dog.

Meanwhile two snotty cats is all i need.

I do miss that Napoleon complex dog, for all her faults she was really cute. And it's called a Jug, but I didn't want to refer to my MIL's jugs...
View attachment ImageUploadedByHome Brew1430839641.555034.jpg

 

[Psylocide]

Moar water.

My dog can't tell the difference between a car and a boat.

 

[DisturbdChemist]

To keep on the new topic

Water

 

[TheCADJockey]

My dog forgets how to dog.

Having one more coffee then I'm done for the day.

 

[MrNic]

Today's haul. I was really surprised to find the Lindemans Cuvee Rene and La Folie in my tiny town.

View attachment 1430841877137.jpg

 

[wyobrewer1]

Today's haul. I was really surprised to find the Lindemans Cuvee Rene and La Folie in my tiny town.

Hey how did your Pakos clone turn out?

 

[Remmy]

On-topic
View attachment ImageUploadedByHome Brew1430842881.609559.jpg

Off-topic
[ame]https://www.youtube.com/watch?v=SB8-YY2DyHI[/ame]

 

[Remmy]

Life sucks. But a RIS will fix it for a few minutes.
View attachment ImageUploadedByHome Brew1430843789.726452.jpg

Just dry-hopped one of the few IPAs I have in primaries. Hope 5 oz. of Columbus does the trick.

 

[MrNic]

Hey how did your Pakos clone turn out?

We're actually brewing it this Saturday. I'll let you know!

 

[MysteryHaus]

Remmy any idea where I can get my hands on one of those ghandi bot glasses? I heard nebco is out

 

[Remmy]

My mosaic dry-hopped saison
View attachment ImageUploadedByHome Brew1430845999.924089.jpg

 

[Remmy]

Remmy any idea where I can get my hands on one of those ghandi bot glasses? I heard nebco is out

Sorry, man. No idea.

But you can buy an empty can of Gandhi Bot for $5.
http://www.ebay.com/itm/Rare-Empty-...042?pt=LH_DefaultDomain_0&hash=item2c9a63a2da

 

[Psylocide]

Speaking of on topic... anyone seen this?

http://lifehacker.com/5508789/create-an-instant-snack-bowl-from-any-snack-bag

I've gained 10 lbs since learning this trick.

Water.

 

[Remmy]

On-topic/fat. Whatever you want to call it.

View attachment ImageUploadedByHome Brew1430848378.669776.jpg

 

[TheCADJockey]

Finally got the house situation back on track, looks like the bank account is about to get obliterated. Got two emails from local architects looking to steal me away from here though!

Lookin' good, I think.

Water and celery.

 

[RevKev]

Guess what sixpoint brew this is.. The glass maybe improper it may not be..... Woooooo

View attachment 1430850230914.jpg

 

[Hello]

Post lunch time lawn mowing beer. Well lots of water because it's really hot, then this.
View attachment ImageUploadedByHome Brew1430850326.045931.jpg

 

[BreezyBrew]

Guess what sixpoint brew this is.. The glass maybe improper it may not be..... Woooooo

Abigale. Water at the Drs. Happy Cinco!

 

[pointcity-homebrew]

Finally got the house situation back on track, looks like the bank account is about to get obliterated. Got two emails from local architects looking to steal me away from here though!

Lookin' good, I think.

Water and celery.

Great news! off topic question. What software would be good for 2D layout? I have been put in charge of the laser cutter and previously the students have been using MS Visio. I feel they'd be better off if they use a CAD type program.

Ideally free, these are broke college students. I have seen several choices, but I am not going to download each and test drive them. I figured someone who deals with CAD on a daily basis could offer some advice.

 

[RevKev]

Abigale. Water at the Drs. Happy Cinco!

You sir win a thumbs up for a good memory:thumbup:

 

[TheCADJockey]

Great news! off topic question. What software would be good for 2D layout? I have been put in charge of the laser cutter and previously the students have been using MS Visio. I feel they'd be better off if they use a CAD type program.

Ideally free, these are broke college students. I have seen several choices, but I am not going to download each and test drive them. I figured someone who deals with CAD on a daily basis could offer some advice.

Well I'm sorry to say I do not have any experience with free programs. CAD is the best, in my opinion (go figure) but you're looking at a $4000 price tag for licensing. That being said...

After just a quick search, you might look into something like http://www.a9tech.com/. I can not vouch for how good it is or not, but the interface looks similar to AutoCAD which would be a nice start for students getting a feel for the industry. That A9CAD program also has the ability to save in .DWG and .DXF which is what we save our drawings in. It might be worth looking into.

Sorry I couldn't help more.

 

[SupervisingChildren]

Cherry coke. Trying not to murder the next person that comes and bothers me.

 

[Hello]

Remmy any idea where I can get my hands on one of those ghandi bot glasses? I heard nebco is out

I've been looking for one that wasn't more than $25 for a long while. No dice for me man. I could have gotten one for $95 though a few months ago.

Water
Shower
Work.

 

[pointcity-homebrew]

Well I'm sorry to say I do not have any experience with free programs. CAD is the best, in my opinion (go figure) but you're looking at a $4000 price tag for licensing. That being said...

After just a quick search, you might look into something like http://www.a9tech.com/. I can not vouch for how good it is or not, but the interface looks similar to AutoCAD which would be a nice start for students getting a feel for the industry. That A9CAD program also has the ability to save in .DWG and .DXF which is what we save our drawings in. It might be worth looking into.

Sorry I couldn't help more.

Thanks, I am downloading now. We have a few CAD and SW licenses, but we share those with Mechanical Engineering and someone always has them checked out. I am just looking for something that every student can have access to at any time.

 

[Remmy]

Nitro pull
View attachment ImageUploadedByHome Brew1430852245.246795.jpg

[ame]https://www.youtube.com/watch?v=3onO-Panwkk[/ame]

 

[TheCADJockey]

Thanks, I am downloading now. We have a few CAD and SW licenses, but we share those with Mechanical Engineering and someone always has them checked out. I am just looking for something that every student can have access to at any time.

Are we talking college?

You might want to check out http://www.autodesk.com/education/free-software/all, as far as I know... the Autodesk products are free for students.

I used CAD/Revit/Inventor for free throughout college. Not sure their definition of 'student' if you're talking high school or something else.

 

[Qhrumphf]

Drinking my Rye Pale Ale. They cut power to do some building work so i might have to get out of the house. It's miserable in here.

 

[podz]

Great news! off topic question. What software would be good for 2D layout? I have been put in charge of the laser cutter and previously the students have been using MS Visio. I feel they'd be better off if they use a CAD type program.

Ideally free, these are broke college students. I have seen several choices, but I am not going to download each and test drive them. I figured someone who deals with CAD on a daily basis could offer some advice.

Germans have long been producing very good software, often for free or not expensive. I am nearly fluent in German, are you?

http://www.chip.de/downloads/FreeCAD_58101804.html

http://www.chip.de/downloads/LibreCAD-CAD-Freeware_53434491.html


.

 

[1977Brewer]

Arnie Palmer. Chasing envelope stuffer quotes. Mailing machine sales people are strange.