Model Number:
YF-S201
Product Description
G1/2" Water heater flow sensor, water flow meter
Scope: Suitable for water heaters, credit card machines, water vending machines, and other flow measurement devices!
Product Features:
1, the product appearance lightweight flexible, small size, easy to install.
2, inlaid with stainless steel impeller shaft, always wearable.
3, the seal with the upper and lower force structure never leaks.
4, the Hall element imported from Germany, and use potting package, prevent water, never aging.
5, all the raw materials are in line with ROHS testing standards
Introduction:
Water flow sensor is mainly made of a plastic body, the rotor assembly and a Hall flow sensor.
Water heater which is mounted on the end, for detecting the water flow, the water passes through the water when the rotor assembly,
Magnetic rotor and change as the flow speed, the Hall sensor output corresponding pulse
Signal, the feedback to the controller, the controller determines the size of the water flow, for control.
Caution:
Non-violent shock, and chemical erosion.
Non-throwing or hitting.
Mounted vertically, does not exceed 5 degrees inclination.
Medium temperature should not exceed 120'C.
Output waveform: square wave
Lead by:
Red IN connector positive
Yellow OUT signal output line
Black GND then negative
YF-S201 Frequency: F = 7.5 * Q (L / Min) error: ± 2% voltage :3.5-24VDC, current can not exceed 10mA, finished a liter of water flow pulse output 450