Tons of fittings: tri-clamp, stainless, valves, keg couplers, temp control, and more

[hvjackson]

Downsizing my brewing setup and it's time to clean out all the hardware I'm not using.

Payment: Venmo or PayPal.
Shipping: buyer pays shipping, $8-15 based on which USPS box I can fit it in.

Willing to negotiate for bulk purchases.


EDIT 10/23/2020: Price adjustments and removed photos of sold items.





Picture D, Tri-clamp parts

1.5” TC x 90° 1/2” hose barb - (7 4) - $5 ea
1.5” TC x straight 1/2” hose barb - (9 6) - $5 ea


Picture E, NPT valves and fittings

Blichmann quick-connect 1/2” NPT with 90° hose barb - (4) - $5 ea
Blichmann quick-connect 1/2” NPT with straight barb - (8) - $5 ea
Tee, 1/2” FPT - (1) - free
Tee / elbow with bushing, 1/2” FPT x 1/2” MPT x 3/8” FPT - (1) - free
Elbow barb, 1/2” hose barb x 1/2” FPT - (1) - free
Street elbow, 1/2” NPT - (1) - free
Hose barb, 1/2” MPT - (5) - $1
Hose barb, 1/2” FPT - ( 1) - $1
Hose barb, 3/8” hose x 1/2” MPT - (1) - $1
Hose barb, 1/2” hose x 3/4” FPT - (3) - $2


Picture F, Thermometers

Dial thermometer, 1/2” MPT, short stem - (1) - $10
Dial thermometer, 1/2” MPT, long stem - (1) - $10
Dial thermometer, 1.5” TC - (1) - $15
Fridge/freezer thermometer - (1) - free
Inkbird 2-stage temperature controller - (1) - $20


Picture G, Commercial / Sanke keg couplers

American D Sanke style, stainless - (2) - $10
German A style, stainless - (1) - $15
European S style, chrome - (1) - $10
Extra nuts, washers, barbs - free w/ coupler



Sold items

Pin lock socket - (1) - $4
Pin lock liquid - (10) - $3 ea
Pin lock gas - (9)- $3 ea
Ball lock liquid - (2) - $3 ea
Ball lock gas - (1) - $3
three piece valve, 1/2” bore, 1.5” TC - (3) - $15 ea
3-way valve , “T” drilled, 1” bore, 1.5” TC - (1) - $20
Quick clean valve, 1” bore, 1.5” TC - (1) - $20
three piece valve with 1/2” FPT, sight glass, 1.5” TC, and dip tube (WTF?) - (1) - $20
1” tee, 1.5” TC - (3 2) - $10 ea
TC strainer, 0.4mm screen, 4" body, 1.5” TC - (1) - $50
1.5” TC x 1/2” MPT - (4) - $5 ea
1.5” TC x 1/2” FPT - (3) - $5 ea
1.5” TC blanks - (4) - $2 ea
1.5” TC x 3/4” FPT - (3) $5 ea
1.5” TC x 1/4” flare - (2) $5 ea
1.5” TC clamps + silicone gasket - (22) - $3 ea
1/4” flare tailpiece - (3) - $1 ea
Fermentor temp strips - (2) - free
Two-piece ball valves, 1/2” FPT - (2) - $5 ea
Hex nippes, 1/2” NPT - (7) - $1

 

[mwayne112]

Interested in

Quick clean valve, 1” bore, 1.5” TC - (1) - $20

 

[brewster2012]

I'd like the 4 each 1.5" TC blanks, 7 each 1/2" NPT Hex nipples, and 3 each 1/4" flare tailpieces pleas. $18 plus shipping if my cipherin' is correct.

 

[schard84]

I'm interested in the 3 3 piece tc valves and the 3 way tc valve from oic B if they are still available.

 

[schard84]

I'm also interested the the 3 tc Ts and tc strainer in pic c

 

[Coastalbrew]

I'm interested in
Hose barb, 1/2” MPT - (4) - $4
Hose barb, 1/2” FPT - (4) - $4
Fermenter temp strips

 

[dawn_kiebawls]

What would shipping be for an American (D) Sanke coupler be to Omaha, NE 68104?

 

[deroosa]

I'll take
three piece valve with 1/2” FPT, sight glass, 1.5” TC, and dip tube (WTF?) - (1) - $20
one of the Inkbird 2-stage temperature controller - (2) - $20
one American D Sanke style, stainless - (3) - $10 and two of the flare adapters
and 10 of the 1.5” TC clamps + silicone gasket - (22 14) - $3 ea

 

[Macbrews]

I would be interested in the following if remaining:
Picture "C" :
All the 1/2" nipples, both !/2" valves

Picture "D":
1.5 TC with 1/2" MPT - all
1.5 TC with 1/2" FPT - all
Blanks - all
1.5 TC 3/4" FTP
1.5 TC with 1/4" flare - both
TC clamps - all remaining

Thanks

 

[Skeptonomicon]

Ill take the ball lock fittings from A,
From B
3x 1.5” TC x 90° 1/2” hose barb - (7) - $5 ea
3x 1.5” TC x straight 1/2” hose barb - (9) - $5 ea
1x 1.5” TC x 3/4” FPT - (3) $5 ea
4x 1.5” TC clamps + silicone gasket - (22 4) - $3 ea

 

[RedRyderr]

Interested in an American D Sanke coupler. How much to ship to MI 49424?

 

[Climb]

Are there any D Sanke couplers left?

 

[hafmpty]

I know this is an old thread. Interested in the Blichmann Quick Connects. Wondering if the 90’s are still available.