fabes
Member
- Joined
- Apr 5, 2013
- Messages
- 12
- Reaction score
- 0
I am building a brutus 10 (propane) and am about to start my putting in my pilot, thermocouple and valves in.
Here are the parts I have:
Pilot Burner: Honeywell Q314A4586 Pilot Burner
http://www.pexsupply.com/Honeywell-Q314A4586-Honeywell-Q314A4586-Pilot-Burner-4113000-p
Valves: Honeywell 1/2", 24 Vac Standing Pilot Gas Valve (24V)
http://www.pexsupply.com/Honeywell-VR8200A2124-1-2-24-Vac-Standing-Pilot-Gas-Valve-11585000-p
Thermocouple : 18" Honeywell Thermocouple
http://www.pexsupply.com/Honeywell-Q390A1095-18-Thermocouple-1724000-p
Burners: High Pressure Cast Iron Banjo Burner (BG 14)
Regulator: LPG regulator for 11" WC with 5' hose
Questions:
1. What kind of TEMPERATURE PROBE I should purchase and how much voltage is needed for it?
2. What kind of controller should I get to control the temperature? and how much voltage is needed?
3. What kind of voltage goes into the gas valve because my gas valves are 24V?
4. What voltage is needed for the controllers?
5. What kind of transformers should be used with the above mentioned valves? and do I need a transformer?
thanks in advance. -Pete
Here are the parts I have:
Pilot Burner: Honeywell Q314A4586 Pilot Burner
http://www.pexsupply.com/Honeywell-Q314A4586-Honeywell-Q314A4586-Pilot-Burner-4113000-p
Valves: Honeywell 1/2", 24 Vac Standing Pilot Gas Valve (24V)
http://www.pexsupply.com/Honeywell-VR8200A2124-1-2-24-Vac-Standing-Pilot-Gas-Valve-11585000-p
Thermocouple : 18" Honeywell Thermocouple
http://www.pexsupply.com/Honeywell-Q390A1095-18-Thermocouple-1724000-p
Burners: High Pressure Cast Iron Banjo Burner (BG 14)
Regulator: LPG regulator for 11" WC with 5' hose
Questions:
1. What kind of TEMPERATURE PROBE I should purchase and how much voltage is needed for it?
2. What kind of controller should I get to control the temperature? and how much voltage is needed?
3. What kind of voltage goes into the gas valve because my gas valves are 24V?
4. What voltage is needed for the controllers?
5. What kind of transformers should be used with the above mentioned valves? and do I need a transformer?
thanks in advance. -Pete