• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

State of my yeast starter

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SteveH aka shetc

Well-Known Member
Joined
Jul 28, 2013
Messages
3,151
Reaction score
5,675
I have this yeast starter in the fridge for about 20 hours, and I am hoping to use it today. I also want to decant it before pitching. But the yeast seems to still be in suspension. It is pretty fresh WLP500 Monastery yeast. Should I wait longer before using?
20180921_084801.jpeg
 
I have never seen yeast not drop out of suspension after 20 hours in the fridge. I have never used that yeast though. If it doesn't drop you'll have to pitch the entire thing.
 
I would definitely wait longer. You have minimal yeast cake on the bottom. @MapleGroveAleworks might know better but if you can put off using it for 36-48 hours, that may be your better option. I think on my Belgian that I did, I crashed it for 36 hours and MOST of it dropped it out. It wasn't crystal clear but I had a nice cake on the bottom of the flask.
 
I too see almost no yeast cake on the bottom. I too have never seen one that didn't drop a LOT better than that in 20 hours in the fridge. You cannot decant that the way it is, so you have two options. 1) chill longer. 2) pitch without decanting.
 
Hopefully you have enough room in your fermenter. I learned to make sure I account for that volume in the starter when filling the carboy. I ended up with a carboy literally filled to the top and had to suck some wort out of the carboy AFTER adding the yeast. I never accounted for 1.4L of starter wort.... Good luck
 
Hopefully you have enough room in your fermenter. I learned to make sure I account for that volume in the starter when filling the carboy. I ended up with a carboy literally filled to the top and had to suck some wort out of the carboy AFTER adding the yeast. I never accounted for 1.4L of starter wort.... Good luck

You didn't necessarily need to suck any wort out. The yeast would have taken care of that for you when fermentation really got going... :yes:
 

Latest posts

Back
Top