• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold SOLD...(TX: DFW) Entire 5/10 gal Brew System, Keezer, Mill etc....

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SouthernYankee

Well-Known Member
Joined
Dec 3, 2009
Messages
410
Reaction score
41
Location
Springtown, TX
Im located in Springtown (76082) which is NW of Ft Worth.
I will not separate (part-out) the system.
I will not Ship the system. You must pick it up!
Cash only!
My email: [email protected]
Cell: 770 289-9899

20221006_101027.jpg20221006_101119.jpg20221006_101143.jpg20221006_101202.jpg20221006_101213.jpg20221006_101235.jpg20221006_101247.jpg20221006_101256.jpg20221006_101325.jpg20221006_102634.jpg20221006_102209.jpg20221006_102243.jpg20221006_102249.jpg

$700 for the brew stand and EVERYTHING you see around it (minus the cornhole game...LOL). I just have to much to list. Im sure 99% of you looking at the pics can tell what all is there. However, Ill give you a fast run down.
  • Single tier brew stand made out of 1.5" 14ga square tubing.
  • The burners are EDELMETAL burners that I modified to fit into the stand.
  • All the hardware came from (cam-locks etc..) Bobby @ Brewhardware.
  • 2 Keggles with a third that doesn't have anything plumbed into it.
  • Mash tun with false bottom.
  • 3 Pumps, One of the pumps is a chugger the other two are just generic pumps.
  • Plenty of carboys with one being a Fermzilla.
  • Grain Mill system.
  • A lot of other small items, water filter, hoses, keggle SS strainer, buckets, etc...

Next we have the Keezer. It was purchased new about a year ago from Best Buy (Insignia) brand. 5.0 Cu. Ft.
$600 for the entire Keezer set-up. Its a Ball-lock system!
  • All the hardware was purchased from Kegconnection.
  • A 4 tap system that has InterTap SS Faucets with the flow control.
  • 6 Ball Lock kegs
  • Taprite Regulator W/ 4 Way Manifold.
  • Temp controller.
  • Co2 Tank (10lbs).
  • Beer tap handles
  • Lots of smaller items to include extra hose, brushes, etc...

 

Attachments

  • 20221006_102345.jpg
    20221006_102345.jpg
    2.2 MB · Views: 0
  • 20221006_102354.jpg
    20221006_102354.jpg
    1.9 MB · Views: 0
  • 20221006_102710.jpg
    20221006_102710.jpg
    2.3 MB · Views: 0
  • 20221006_102227.jpg
    20221006_102227.jpg
    1.8 MB · Views: 0
  • 20221006_102215.jpg
    20221006_102215.jpg
    2 MB · Views: 0
Last edited:

Latest posts

Back
Top