Sneek preview RIMS single tier

[Option]

Wow coming together so nicely, cant wait to see the finished product. That is a control panel to make anyone jealous! haha good job!

 

[lehr]

Just have to weld on the gas beam and I'm done the owner is going to wire it.

 

[ghart999]

Where did you get those wheels an how much? Are they threaded stem or expandable rubber? 3" diameter wheels?

 

[lehr]

Where did you get those wheels an how much? Are they threaded stem or expandable rubber? 3" diameter wheels?

Caster city.com 1/2 inch threaded stem 18.00 locking 15.00 nonlocking 7.00 shipping. On my two tier I'm going to put 3/4 inch stem casters on it I think 1/2 is a little small for something this heavy if you are rolling it over uneven ground.

Pat

 

[Brichards700]

This thing is amazing.

 

[Seabee John]

1st of all, that thing is sexy... no other descriptor works. It looks like the control panel is weld mounted to the frame... I'm always surprised to see this. I know wiring can be a PITA, but a swivel bracket or similar configuration that will allow the panel to be removed or placed out of the way in between brewdays is a smart move IMHO. Of course, if brewing space in not a premium , then it's not an issue, but I'm fighting for every square inch. As far as the rest of the build, Awesome job man!

 

[lehr]

1st of all, that thing is sexy... no other descriptor works. It looks like the control panel is weld mounted to the frame... I'm always surprised to see this. I know wiring can be a PITA, but a swivel bracket or similar configuration that will allow the panel to be removed or placed out of the way in between brewdays is a smart move IMHO. Of course, if brewing space in not a premium , then it's not an issue, but I'm fighting for every square inch. As far as the rest of the build, Awesome job man!

John it's not welded to the frame, it is mounted on a stainless pivot so when your not brewing you can move it right next to the pots. One nut and three quick disconnects and it comes right off just like my two tier.

Thanks Pat

 

[Seabee John]

John it's not welded to the frame, it is mounted on a stainless pivot so when your not brewing you can move it right next to the pots. One nut and three quick disconnects and it comes right off just like my two tier.

Thanks Pat

Cool... I couldn't see that from the pics... looks like you've planned this well. Sharp!

 

[bullywee]

Looks like the "Viking Stove" of brew stands! Top notch!