orangehero
Well-Known Member
Hello,
This is a 120V heating element controller to be used with a HERMS or RIMS system. Plug the controller into a 20A GFCI circuit and up to 2000W/120V element into the controller.
Specs:
Auber SYL-2352 PID
60A SSR w/ External Aluminum Heatsink
Auber RTD Panel Connector
PID Power Rocker Switch
20A Element Power Toggle Switch with Red Indicator Lamp
20A Receptacle
1A Fastblow Inline Fuse for PID
12/3 Cord x 10 ft
Wired as in diagram. Tested working but is otherwise new...all components are new and haven't been used for a single brew.
$185 + $15 flat rate shipping.
This is a 120V heating element controller to be used with a HERMS or RIMS system. Plug the controller into a 20A GFCI circuit and up to 2000W/120V element into the controller.
Specs:
Auber SYL-2352 PID
60A SSR w/ External Aluminum Heatsink
Auber RTD Panel Connector
PID Power Rocker Switch
20A Element Power Toggle Switch with Red Indicator Lamp
20A Receptacle
1A Fastblow Inline Fuse for PID
12/3 Cord x 10 ft
Wired as in diagram. Tested working but is otherwise new...all components are new and haven't been used for a single brew.
$185 + $15 flat rate shipping.