Show us your Sous Vide Cooker!
- Thread starter Brewing Clamper
- Start date
Help Support Homebrew Talk:
I had a cast iron griddle that I used on the stove top. It took about 2 minutes a side to get a sear.
Huaco
Well-Known Member
Yeah, an all-day soak in the cooker followed by a sear should not have produced a dry steak. Quite the opposite actually...
It was prime from Costco.
I will have to try again. The exterior of the steak seemed oxidized (brownish), while the interior was still pinkish/medium well when I took it out of the sous vide.
Just saw this on the Jet City Gastroponics FB page, the Sansaire Sous-Vide is now at Sur La Table and it's under 200 bucks.
Just saw this on the Jet City Gastroponics FB page, the Sansaire Sous-Vide is now at Sur La Table and it's under 200 bucks.
That's pretty cool. Sure beats firing up my sanke-sized sous vide. Grrr.
I'm still on the fence about buying them... I'm really proud of my DIY setup, and people are really impressed when I pull something out of my bubbling coffee urn, brown it up in a pan and present a beautiful piece of meat.
For me the biggest part of all this homebrewing/cooking passion of mine is that I get to make and experiment with re-purposing things.
I get that. But one of my goals with sous vide was to have the ability to seal something in the morning, tell my wife what temp to set and what time to start it, so that it'll be ready when I get home from work.
That's not going to happen if she has to mess with a complicated homemade setup... So I bought the Anova.
Okay, attempt two. SWMBO picked up NY strip today. Any suggestion on times/temps?
Is set the temp to just under the temp you like a done steak. For myself I wouldn't go over 120F. With that cut you only need to bring it up to temp not break down tough connective tissue. So maybe an hour, just guessing though cause I've never cooked with sous vide for "just til done". I usually take advantage of the fact that the food can never get hotter than the water and let it sit for hours. Then be sure to sear it over scorching heat. With all that said, I'd just toss those steaks on the grill sans sous vide.
I'm sure I dropped this link in this thread before, but here you go, an online guide to sous vide.
http://www.douglasbaldwin.com/sous-vide.html
http://www.douglasbaldwin.com/sous-vide.html
Thanks. Looks like about 120 for at least 45 minutes.
Airplanedoc
Well-Known Member
Moms birthday dinner
Peppered pork loin
2x baked potato with 4 state cheddar, whipping cream, butter, bacon, and chive.
And. Airplanedoc merlot
Sous vide 28 hours then seared off in grill
Peppered pork loin
2x baked potato with 4 state cheddar, whipping cream, butter, bacon, and chive.
And. Airplanedoc merlot
Sous vide 28 hours then seared off in grill
Copbrew133
Well-Known Member
Once again I have to say thanks to the folks on the site for another great idea. I saw this thread a couple months ago and thought oh wow that's pretty cool. Then we went to a pretty fancy restaurant in Tampa and I got sous vide venison which was awesome. I then thought I gotta build one so I ordered a single stage Fahrenheit controller and built the controller. Tonight was the first time using it, medium porterhouse (on sale at the store) with salt pepper garlic powder and rosemary and Gorgonzola, roasted garlic red potato mash, and roasted sweet onion brussel sprout with bacon laudons. Made a red wine reduction sauce out of the juice in the bag and the pan drippings from the sear. It was REALLY GOOD! Can't wait to try this with some fresh grouper.
Huaco
Well-Known Member
Ok... I got some Bone-in Lamb loin for Easter Sunday. I want to SousVide cook them. Any suggestions? These look like little T-Bone steaks. I also got some high quality mint spread to serve with it. Recomendations on sides? What temp to cook at? I usually do my steaks at 135°F.
According to Logsdon in Modernist Cooking Made Easy, he says for medium rare 131 (55c) 2-4 hours.
As to sides, have you ever done Fondant Potatoes.... You can do it in a baking pan for larger amounts.
Fondant Potatoes
I also like to get some baby spinach and make a mound on the serving platter, dress it with a little lemon juice, maybe some thin slices or parm/reg and then the second you brown off the chops after pulling them out of the bath, plate the chops right on the spinach. The heat will wilt some of the spinach and the rest will stay normal, o you get a couple different spinach textures going. And lightly spoon over any pan drippings or a warm vinegrette.
Or make a compound butter and lay a few slabs on top to melt down over everything. Like this.
Huaco
Well-Known Member
Yep... It all was EXCELLENT!!!!
I "over-browned" a few of the potatoes but other than that, it was awesome! Thanks Revvy for the suggestions! I made a lemon dressing for the spinach and I just wish all of the spinach was wilted. Overall though, It all was a huge hit!
Seared with grape seed oil. I like this method better than torching...
I "over-browned" a few of the potatoes but other than that, it was awesome! Thanks Revvy for the suggestions! I made a lemon dressing for the spinach and I just wish all of the spinach was wilted. Overall though, It all was a huge hit!
Seared with grape seed oil. I like this method better than torching...
Looks amazing. Yeah you could have done a pure wilt/sautee, with maybe a little garlic or whatever, I do that about 50 percent of the time. I sometimes like the texture differences between the non wilted and wilted.
:rockin:
:rockin:
What did your family think of the fondant potatoes?
Huaco
Well-Known Member
Seeing as how I served the kids plates first and those potatoes were completely gone from their plates before the adults finished serving our plates... I'd say they were a hit!
I need to bump the temp down a bit next time I do them though. They weren't burned, but not far from it. Still tasted great.
Yeah, I've crisped a few myself. I've also tried different potatoes and totally ruined them. But they are really tasting and unique. Glad everyone liked them. I guess they're more common in the UK than in the states. I first saw them on a bbc cooking show and they just sounded awesome.
DamonInPHX
Active Member
Huaco
Well-Known Member
Oh... of course! In a clad-bottom stainless pan. Waited 'till it was shimmering nicely and plopped them in, but only AFTER DRYING THEM OFF!!!
Maximustraicos
New Member
This is the sous vide machine I built from a temperature controller from my LBS
And this is the one I use at work
Message me for instructions if you like.
Sent from my iPhone using Home Brew
Awesome. Still haven't tried eggs yet.
What heating element are you using for you "homebrew" one?
What heating element are you using for you "homebrew" one?
Maximustraicos
New Member
It's the element from a cheapo kettle. I just cut a hole in my tank and popped it through. I even managed to save the silicone gasket from the kettle.
Sent from my iPhone using Home Brew
Sent from my iPhone using Home Brew
dinnerstick
Well-Known Member
plug warning. my friend and his buddy developed and assembled this new commercially available dutch-made water bath.
https://www.ribmeister.com/
they got real nerdy with the pid controller algorithm and the placement of the heating elements and all that, with lots of modeling and experimental validation, and on top of that the aesthetics are frankly awesome. their first production run is just done so they are taking orders. i'll get mine tomorrow and report back!!
https://www.ribmeister.com/
they got real nerdy with the pid controller algorithm and the placement of the heating elements and all that, with lots of modeling and experimental validation, and on top of that the aesthetics are frankly awesome. their first production run is just done so they are taking orders. i'll get mine tomorrow and report back!!
I have used the Polyscience Professional (classic now I see) for over 5 years at 3 different restaurants. It is a great tool, but for home use I would say way overkill. I use one weekly at work to make 24 hour pork short ribs that are fall off the bone tender and I get compliments on them every day. For home I have used anything from a big pan of water in my oven to a PID controlled electric skillet and one of these days a keggle HERMS... I love sous vide, especially in the restaurants... as Ron Popeil would say... "Set it and forget it!" not really but kinda....
Oh yea, and transgluaminase is some really cool stuff! Not trying to hijack the thread, you can do some really cool stuff like Revvy did with the chiducken wrapped in bacon. One of my favorite things was to take the spinalis muscle off of a ribeye roll (think of that extra tender marbled part wrapped around the eye of the ribeye) and dust it with Activa RM and roll it up, then cut "filets" out of it. Fantastic!
Chef Jay
Similar threads
