Show us your Kegerator

[Rui]

The small goes to my kitchen, as my missus request!!
The big stays in my "brewery" : ))

https://imgur.com/kUga92l

 

[Brewenstein]

Posted when she was first done, but now she has some swag.

View attachment ImageUploadedByHome Brew1507585672.896470.jpg

 

[Blackdirt_cowboy]

Here's mine. It can hold three cornies. Just got it installed and two kegs carbing as we speak.

 

[Dan]

View attachment 413470View attachment 413471View attachment 413472View attachment 413473

Almost done with mine!

Love it. Instant classic!

 

[Anharmon7]

My first one!

 

[rabassa]

Here's mine. It can hold three cornies. Just got it installed and two kegs carbing as we speak.

that's awesome

 

[mapatane]

Portable Beer wall

View attachment IMG_2742.jpg
View attachment IMG_2743.jpgView attachment IMG_2744.jpgView attachment IMG_2746.jpgView attachment IMG_2747.jpgView attachment IMG_2749.jpgView attachment IMG_2750.jpg

Inspired by an HBT build
I can no longer find. I built this beer wall from free fencing on the side of the road and stuff lying around the garage. Total cost $0.

I borrowed taps and plumbing from my kegerator. Huge hit at neighborhood Octoberfest.

 

[CGVT]

Nice!

 

[homebrwd]

First kegerator:
First one bit the dust (compressor went out), so I took the parts and moved them over to this one. Fit 2 5-gal corny kegs or one 5-gal carboy inside. Used an STC-1000 temp controller.
View attachment 413179

What Model Frigidaire is this?

 

[frodus17]

What Model Frigidaire is this?

Frigidaire Model FRC445GB
My build thead:
https://www.homebrewtalk.com/showthread.php?p=7304637#post7304637

Here's a thread just about that model:
https://www.homebrewtalk.com/showthread.php?t=89013

 

[Nelrock]

Ours

 

[homebrwd]

Got my holes drilled and taps loosely installed while I wait on my wrench from keg connection. Looking more into how this fridge works to see if I need to worry about coolant lines when attaching the gas manifold. Marked the two sports for a 3rd and 4th tap. This should be able to hold 4 cornies. Super excited.

 

[justinv29]

Here's my nearly completed keezer bar build. I wanted the coffin style tap box but also wanted to be able to utilize the top as a bar area in addition to making it easier to access the inside of the freezer so I went with an offset coffin.

 

[homebrwd]

Got my holes drilled and taps loosely installed while I wait on my wrench from keg connection. Looking more into how this fridge works to see if I need to worry about coolant lines when attaching the gas manifold. Marked the two sports for a 3rd and 4th tap. This should be able to hold 4 cornies. Super excited.

Little more info, 10.2 CuFt system, 7.1 Fridge and 3.1 Bottom Freezer. With the CO2 outside it can hold 4 kegs with a little shaving of the shelf mounts.

More pics, need to clean up my tubing and get my manifold installed as well.

 

[Dewfang]

View attachment IMG_1714.jpg

 

[cccoltsicehockey]

Finally completed mine about 2 weeks ago. Took about 6 weeks to complete it. Took the over all design idea from amath build here https://www.homebrewtalk.com/showthread.php?t=581041. But changed it up as I wanted a more rustic look to it.

Still have some finishing accessories to add as I am having hand forged iron brackets made for the shelf and stainless vent covers for the two compressor compartment vents.

 

[arturo7]

Nicely done, triple C!

 

[sbsmann]

Simple yet functional in my Man-Cave. And yes, those are bottles of Black Gold inside!

 

[tseabourn]

This is on the back patio. I incorporated our utility sink. CO2 and 4 gallon hot water heater are stored under the sink.
View attachment 420711

 

[treacheroustexan]

Here's my nearly completed keezer bar build. I wanted the coffin style tap box but also wanted to be able to utilize the top as a bar area in addition to making it easier to access the inside of the freezer so I went with an offset coffin.

Beautiful! Good work.

 

[Nemanach]

Just finished this today. It’s an Insignia unit that I can put (3) 5g and (1) 3g ball lock kegs in with the gas outside. Gotta shorten the lines up though as it pours too slow.

 

[blkmagik98]

Finishing up today, just have a few things to do, mainly a fan and to tidy up the beer and gas lines. Having an image problem though, so will upload to my website and link from there.

 

[Yesfan]

Finishing up today, just have a few things to do, mainly a fan and to tidy up the beer and gas lines. Having an image problem though, so will upload to my website and link from there.

What kind of taps are those?

 

[blkmagik98]

They're flow control Rototaps.

 

[LRS_Brewer]

I found this while searching images online, and was hoping the builder is on this site. Regardless, could someone elaborate on the best way to attach or cut-in a refrigerator with boards so as to allow it to be framed and opened? I am looking to mimic this design, but am not sure if I should just go with construction adhesive, or actually building a shell that is then attached to the refrigerator?

 

[crusader1612]

I found this while searching images online, and was hoping the builder is on this site. Regardless, could someone elaborate on the best way to attach or cut-in a refrigerator with boards so as to allow it to be framed and opened? I am looking to mimic this design, but am not sure if I should just go with construction adhesive, or actually building a shell that is then attached to the refrigerator?

View attachment 549619

Glue is your friend. Just don't cover the coils at the back. Pain black with chalk board paint and frame accordingly (this isn't mine, but I built the TARDIS further back the same way).

 

[CGVT]

I found this while searching images online, and was hoping the builder is on this site. Regardless, could someone elaborate on the best way to attach or cut-in a refrigerator with boards so as to allow it to be framed and opened? I am looking to mimic this design, but am not sure if I should just go with construction adhesive, or actually building a shell that is then attached to the refrigerator?

View attachment 549619

There are a couple of threads on here where people have glued the wood directly to their keezers and they are still working after 4 or 5 years. I have a friend that is an AC+R guy. He laughs and says that the compressor life that you might lose is not worth the hassle of over engineering. The R value of 1/4" plywood is <.31.

I used liquid nails on mine.

 

[brewskitom]

Keg King kegerator from MoreBeer. I'm super happy with this unit. It holds two 5 gallon and one 2.5 gallon kegs, plus glasses and some random bottles. I added a dual regulator so I can run two different pressures. The dispensing pressure goes to a three way manifold and the second is available for force carbonating, pushing beer between kegs, maybe a bottle filler in the future, etc. CO2 is in a nearby cabinet for ease of exchange. Without the regulator, manifold and glass holder you could fit three 5 gallon kegs.

Third keg is hiding in the back...

Dual regulator and manifold.

 

[hammerthreat]

Basement beer station...

 

[TANSTAAFB]

Basement beer station...View attachment 550583

Now that's just sexy right there! Are those Best Buy/ Insignia kegerators? Mine's out for delivery right now, so freakin stoked!