Show us your Kegerator

[mmb]

cheering for the wrong teams is bad.
I can forgive the bud lime.

I think you have your priorities backwards....

 

[Recusit8m]

Picked ths Fridge up for 10$ from a local Pharmacy...Dual Keg setup from Midwest with 5# Co2 $189...Shanks and Faucets from LHBS 70$...I have an old College Hockey stick from about 20y ago when they were still wood and Im going to cut down 2 sections for Tap Handles. Then tape them up like I used to and write the name of brew on tape so I will be able to cover them up with each brew...Hopefully if I put the gas on the outside I can get another keg in there...

 

[Rick500]

Hey, I recognize that big yellow sticker on the CO2 tank.

 

[Shambo]

I just finished my dual hinge keezer.
I pretty much stole everyone's ideas... so thanks guys!

 

[WeilandBrewery]

My first post. I look forward to becoming a regular on this great site!

Cheers

Sidenote: I'm not sure why these pictures didn't post correctly. I used IMG tags. Help, anyone?

 

[HighPlainsDrifter]

Looks good. Welcome to the site. Only paying members can post pics, do it, it's worth it, trust me.

Here are your pics:

 

[WeilandBrewery]

Looks good. Welcome to the site. Only paying members can post pics, do it, it's worth it, trust me.

Thanks....and I will.

Cheers

 

[iceman80403]

Looks good. Welcome to the site. Only paying members can post pics, do it, it's worth it, trust me.

Well, that's not true. You just have to be around for some small amount of time and/or have a certain number of posts. I don't recall which.

For example:

 

[HighPlainsDrifter]

Well blow me down, I guess I need to pay more attention. What I do know is that the membership IS definitely worth it.

 

[masonsjax]

You need a minimum of 25 posts, then your links magically become pics.

 

[DeathBrewer]

cheering for the wrong teams is bad.
I can forgive the bud lime.

I think you have your priorities backwards....

SRSLY...I think you need to rethink your standards...

 

[Denny's Evil Concoctions]

You need a minimum of 25 posts, then your links magically become pics.

That was put in place a few months ago when some spammer blasted the forum with ****loads of hardcore porn.

 

[bendavanza]

I just had my freezer skinned in stainless, it turned out nice. I'm switching to shift knobs for tap handles for the low profile since I moved it inside under this cabinet. 25 gallons of homebrew went through this last night:
10 gallons of the cream of 3 crops, 5 of a wheat, 5 of oatmeal stout, and 5 of an imperial red
-cheers-

 

[Rick500]

Nice! Did you do that yourself or have a pro do it? Do you mind my asking how much that set you back (just skinning it in SS, I mean)?

 

[bendavanza]

Rick500
I paid about $160 for the materials and the labor was a gift. Raphael does stainless work for a living, mostly commercial kitchen stuff. Here is a pic in action after floating a few kegs.

 

[IrregularPulse]

That stainless work is beautifuL! Nice

 

[wlampe]

I like the stainless steel.

Do you have pics of the transformation process?

 

[wlampe]

Was it a paint or coating?

 

[Joker]

Was it a paint or coating?

I am going to go out on a limb and say it is sheets of stainless steel bent and shaped to the freezer.

 

[wlampe]

I am going to go out on a limb and say it is sheets of stainless steel bent and shaped to the freezer.

It sounds crazy but they have a coating you can paint on appliances now.

Video: Thomas' Liquid Stainless Steel

Thomas’ Liquid Stainless Steel - Homepage

 

[BeardedSquash]

Here's the inside and outside of my baby. Not much to look at, but she makes me happy.

 

[uwjester]

Here's the inside and outside of my baby. Not much to look at, but she makes me happy.

Nice fridge. Is that a bottle of utopias upper left?

 

[BeardedSquash]

Yup. I've managed to keep away from it for a year now, but it's getting harder and harder to let it just sit there.

 

[HVBrewtality]

Yup. I've managed to keep away from it for a year now, but it's getting harder and harder to let it just sit there.

how much did you pay for it?!

 

[DeathBrewer]

It's $30/ounce at one of my favorite beer bars. Good stuff, I've bought it three times now. I think that third will be the last, however.

 

[BeardedSquash]

My wife bought it for me on eBay. I don't know exactly how much she paid, but I think it was around $175 with shipping and insurance.

 

[bendavanza]

It sounds crazy but they have a coating you can paint on appliances now.

Video: Thomas' Liquid Stainless Steel

Thomas’ Liquid Stainless Steel - Homepage

That may be true but this freezer, like many, has a texture. This job used ss panels cut and shaped to fit. The top was heavier gauge than the sides and has welded front corners. It fit like a glove. The side was a panel with 2 folds. Then a trim piece was cut from L channel to cover the top seam. I plan on adding a handle to the front side of the lid. One challenge we had is that the sides of this whirlpool are swollen, making the corners not fit quite right, which made the trim piece necessary. I've picked up 2 more shift knobs and just need two more to complete it. I would not mind a second stout faucet as well so I could serve a nitro pale ale.

 

[Spyd3r]

I don't have a Kegerator yet...

But these are some cool ones that I saw on the net.

...I guess I can't post pics yet.

 

[AJ_in_HD]

I don't have a Kegerator yet...

But these are some cool ones that I saw on the net.

...I guess I can't post pics yet.

nope. you need 25 posts, then they'll show

 

[arturo7]

The top on is bad-assed!