Show us your Kegerator

[kjones]

ok heres mine

 

[T Red]

Here's mine. Nothing fancy, just a free fridge and three taps with room for carbing one more and storing a few bottles.

You need to find an International Harvester fridge. I've been searching for years and haven't found one yet. Someone on this board has one for a kegerator.

 

[nostalgia]

Here's a more recent shot of mine to show off my new kilt

-Joe

 

[jpc]

Here's a more recent shot of mine to show off my new kilt

Even better with the phallic tap-handles...

 

[boogyman]

Here's my new kegerator.. the old fridge was dying, and SWMBO approved a new one as long as we got the color she liked. I built a platform for the bottom and painted a sign on the side with chalkboard paint... now I just gotta drill holes in the side for the taps. Kinda reluctant to drill through a new fridge though.

continued...

 

[boogyman]

I even put little rubber skid pads on the bottom so it wouldn't slide or damage the bottom. Plus, it's easy to remove when I need to clean.

 

[Arneba28]

Hey, who put that coors light in there!!!

 

[boogyman]

Hey, who put that coors light in there!!!

haha. i've had that since we had people over for the superbowl. i just NOW cracked it open since I drank everything good just started brewing another batch of homebrew, so that'll be ready in a couple weeks.

 

[Tonedef131]

I just realized I haven't posted mine in here yet. I finished it a couple months ago and it's great, I still plan to spin some custom tap handles for it and haven't gotten around to mounting the drip trays yet...any suggestions?

 

[TwoHeadsBrewing]

I just realized I haven't posted mine in here yet. I finished it a couple months ago and it's great, I still plan to spin some custom tap handles for it and haven't gotten around to mounting the drip trays yet...any suggestions?

Nice work! I must say, this is my favorite kegerator on this thread. 8 perlick taps, two 4-way regs, and a chalkboard on top! Love it, great job!

 

[wildwest450]

This all started with a dream, and an empty/unfinished closet in my man cave.

 

[Denny's Evil Concoctions]

Nice. Needs a coin slot beside it. lol

 

[nucmed24]

that is a sick set up, wildwest!

 

[bendavanza]

Wildwest
Nice job!
I want to do the same thing with taps in the kitchen, but I'm not sure I want to cut up my nice stainless backsplash or cut up my exterior wall.
-Ben

 

[wildwest450]

Wildwest
Nice job!
I want to do the same thing with taps in the kitchen, but I'm not sure I want to cut up my nice stainless backsplash or cut up my exterior wall.
-Ben

The only thing nicer than stainless backsplash, is stainless backsplash with taps sticking out of it!

 

[MoRoToRiUm]

I live in n apartment, and the kitchen was OLD (talking ugly green here)... FLASHING! A little late for you, but for the price, it's held up great, easy to clean, and really helps with the halogen under cabinet lights I put in.

Sorry for the I just wanted to share a cheaper alternative...

 

[daktruckie99]

Just finished up the install last night.

The top is 3/4" birch. Sides are pine. It's got 2 coats of stain and 2 coats of Spar Urethane on top to protect from spillage.

The chest freezer has a refridgerator thermostat installed which works well for keeping things at 40F inside. I've got it set up to have 3 on my CO2 and 2 taps on top as you can see.

On to the pics:

Chocolate porter and IPA

-Mike

 

[TwoHeadsBrewing]

Just finished up the install last night.

The top is 3/4" birch. Sides are pine. It's got 2 coats of stain and 2 coats of Spar Urethane on top to protect from spillage.

The chest freezer has a refridgerator thermostat installed which works well for keeping things at 40F inside. I've got it set up to have 3 on my CO2 and 2 taps on top as you can see.

On to the pics:

-Mike

No pics are showing up...sounds beautiful though!

 

[IrregularPulse]

Just finished up the install last night.

The top is 3/4" birch. Sides are pine. It's got 2 coats of stain and 2 coats of Spar Urethane on top to protect from spillage.

The chest freezer has a refridgerator thermostat installed which works well for keeping things at 40F inside. I've got it set up to have 3 on my CO2 and 2 taps on top as you can see.

On to the pics:

Chocolate porter and IPA

-Mike

oh what a disappointing update to kegerator thread This thread is nothing without pics.

 

[daktruckie99]

I fixed the urls, still not working? I've been having host problems all day.

 

[TwoHeadsBrewing]

No, that works great...the ridonkulus is workin it! How many coats of poly did you put on top of the wood, looks really nice!

 

[daktruckie99]

No, that works great...the ridonkulus is workin it! How many coats of poly did you put on top of the wood, looks really nice!

The stain is called "Polyshades" and has poly in it. Then I threw 2 coats of spar urethane over that for additional protection.

 

[lizzymmmcf]

Just updated mine with a dual tap tower. (don't mind the drip mat, it will be changed soon)

Looks nice...except the bud light crap! nice poster

 

[SHvanBommel]

DakTruckie, How often do you go to the porstmouth brewery? (I live up the Street) AND I HAVE 2 Bottles of '09 KTG... :-D

 

[daktruckie99]

DakTruckie, How often do you go to the porstmouth brewery? (I live up the Street) AND I HAVE 2 Bottles of '09 KTG... :-D

Not very. I took SWMBO to Plum Island for our anniversary last year. Then we went up to Portsmouth for dinner and drinks on Sat. night.

 

[TexasStu]

I finally get to show off my big 10".....

!!!!



Collar, that is! (better pouring height and I need the exercise!)​

 

[jppostKW]

finally got it done!
holiday freezer with tiled top. Plan on holding a corny for me and a slim quarter of domestic for SWMBO she wont drink anything else......yet
building a tower cooler this weekend the tower is hinged for access to the internal workings holds a 5lb co2 on the hump with room for a growler if needed


020 on Flickr - Photo Sharing!

026 on Flickr - Photo Sharing!

 

[Boerderij_Kabouter]

I realized I have not posted in here yet....

Nothing special. 4 Perlicks, holds 6 kegs.

 

[Plan9]

I just realized I haven't posted mine in here yet. I finished it a couple months ago and it's great, I still plan to spin some custom tap handles for it and haven't gotten around to mounting the drip trays yet...any suggestions?

Rain Gutter

 

[Tonedef131]

Rain Gutter

I actually have the drip trays, I just haven't figured out a good way to mount them yet.