secondary regulator reversible?

[RedBeard23]

Couple of quick questions-

I'm looking at this secondary regulator Taprite T1661ST to be used primarily for force-carbing; and because of my keezer's design- is it possible to have gas feed line to come in from the left side of the regulator? (Moving the barb from right to left)

Second question- does it matter what orientation the regulator has to be mounted?

Every regulator I've seen has the barb for gas feed coming in on the right side and the gauge on the top side.

Thanks in advance! I apologize if this could be easily searched in the forum, I've tried few times and couldn't find anything.

 

[orangehero]

It should be fine with the high pressure coming in on the left side. If you rearrange the fittings make sure you use teflon tape and test for leaks. Mounting orientation doesn't matter.

 

[RedBeard23]

Thanks- I called BeverageFactory and they were nice enough to offer custom job on the secondary regulator.