Secondary Reg leak

[forcabrew]

So I got a Cornelius 4 body secondary regulator set that I had to rebuild. When I put it all back together there were a couple of small leaks. My question is can I use this with or with Teflon tape?
http://www.amazon.com/dp/B001AMMXZW/?tag=skimlinks_replacement-20

I know kegconnection uses this when they assemble there regs.
http://www.amazon.com/gp/product/B001P5F9X2/?tag=skimlinks_replacement-20

Are these two products comparable or am I way off base. I picked up a tube of the first link at my local homedepot. But I'm wondering if I should use it or just order the other stuff from Amazon.

Thanks all

 

[forcabrew]

Bump

 

[Jim_Holmes]

i would just try using a couple extra wraps of thread tape dont know if you need the other stuff never used the other stuff

 

[forcabrew]

Thanks for the reply. Going to play around with the regs today