Scuba's Rig Build 2: Judgment Day

[ScubaSteve]

So I started building a new rig. I used to have a wood rig that was more than enough for my purposes, but I was moving, and in the spirit of shedding unnecessary items and conserving space in the new home, I sold it.

You can see my build of the wooden rig here:https://www.homebrewtalk.com/f11/scubas-herms-build-36267/

Wood is a really underrated medium in homebrewing. If you put some thought into your design, it will serve you for years!

Back to business!

 

[ScubaSteve]

I "acquired" a really well built SS cart. I just knew it had potential for brewing purposes. I put all my vessels on it in all sorts of configurations, but I was never satisfied....I would stare at it trying to figure out how to make it work. Finally, I just put all my toolboxes on it and used it as a rolling cart for projects.

After I moved (and no longer had a rig), I looked at it again. It's just wide enough to fit 2 sankes on top:

More Pics:

Beefy shopping cart wheels (spider webs included):

So, what I think I'll do is have the HLT on the top left, the BK on the top right, and the MT on the bottom. I'll leave room for either my 10 gallon Coleman or Sanke MLT. Truth be told, I like the cooler better, but it's not as uniform as the SS keg MLT.



.

 

[BlindLemonLars]

Wood is a really underrated medium in homebrewing.

You're not kidding! This is my latest build.

 

[ScubaSteve]

I guess you can call this a 2-tier rig....but that's okay with me.

My philosophy changed after having a 1-tier:

-Using more height (gravity) to flood the hell out of the march pump. If I want to prime my tubing, it'll be a snap.

-Using gravity to drain the bk through a CFC. I can also use my pump for this, but I don't have to. I used to use a B3 50' 1/2 " IC.
(that's a different discussion, which I can comment on outside of this thread)

-Not worrying about having my HLT higher in the air. It's really well supported by side rails, it's heated in place, and I have a sight gauge to tell me how full it is. I mean, come on....we all know what hot water looks like! It's not that high anyway, but it saves MEGA space being stacked....

-Here's the big one! Not worrying about having my BK in the air! I know some folks may wonder about this....I started using fermcap-s, and now I don't worry about boilovers! I realize I don't need to look into the BK anymore worrying about foam, so now I just toss my hops in and stir. I can still see in the keggle on my toes, so it's not a problem. At flameout, I whirlpool and drain to the CFC. I plan on integrating a hopback that goes on/off with QD's for easy removal.

The advantages? I have a rig that takes up a hell of a lot less space than my single-tier:

I know it's not as pretty, but it does the same thing in a compact, shiny package! I still have my pumps, but I can also use gravity, because it's free!

 

[ScubaSteve]

I realized (luckily) that this thing was built out of SS tubing. If I were to integrate burners and heat the thing up, the tubing might explode. See this thread for more info! : The Northern Brewer Homebrew Forum :: View topic - EXPLOSION! On National Homebrew Day - Converted Keg

So, I drilled out the SS with a Dewalt titanium split-tip bit. The black moly bit I used barely scratched the 316 SS. Man, SS is a hard metal! Note the small hole...

Here's another pic, showing the orientation of the SQ14 burners I plan to use:

And another:

 

[N5629]

When you say whirlpool at flameout, forgive my ignorance, but just what the hell does that mean?

 

[ScubaSteve]

Sorry, I notice I use quite a few acronyms, etc. When you're done boiling your wort, you turn off the burner and get ready to cool the wort. That's flameout. Before you do that, you can take a sanitized spoon and create a strong whirlpool, and that will cause all the particulate hop debris to concentrate and settle in the middle of the kettle. If you drain the kettle with a dip tube placed near the inner wall of the of the kettle, you will avoid that pile of debris, and it won't make it into your beer....and that generally equals clearer beer.

 

[N5629]

You can always tell the quality of a hobby/obsession by whether or not the uninitiated can tell what you are talking about. The obtuse the nomenclature, to more involved and interesting the hobby.

In one of your earlier posts on this thread, you refer to a cooler MLT as being not as uniform as the SS keg MLT - is that a temperature thing or a matter of aesthetic?

 

[ScubaSteve]

I think the SS MLT is going to be more aesthetic in this rig. But, experience shows that the cooler will hold temp within 1 degree well over an hour on a cold day.....so I'll make sure I leave room for either MLT, and maybe allow for an upgrade to a rectangular cooler in the future. I'm a batch sparger.

 

[LooyvilleLarry]

Damn. Stole my idea! I saw these at Sam's club and thought that might work well! I think they were around $65 or so.

 

[Damonic]

No concern of the SS wire shelf sagging under heat and weight?

 

[ScubaSteve]

Sure...that's probably the biggest engineering problem I'm facing. We'll see what happens...it's 316SS and frickin solid. It may be wire style shelving, but the wires are 1/4" each....and there's a lot of them. Experience with my last rig showed me that 2 pieces of 1/8" angle iron were more than strong enough to support a full keg getting blasted by a banjo burner. Plan B is to slide a few pieces of angle under the top shelf, if necessary.

 

[gwood]

Damn. Stole my idea! I saw these at Sam's club and thought that might work well! I think they were around $65 or so.

Is this what you were thinking?

Costco - Seville Classics Utility Cart

 

[ScubaSteve]

That will probably work too...but I'd be careful putting heat on something like that. This cart I'm using is really well built, SS through and through, no coatings/platings etc. I had a hell of a time drilling through the bars....you can really tell the difference between brass, mild steel, etc. and SS. It's a pretty hard metal. I imagine a cart like this would be well out of my price range if bought new.

 

[ScubaSteve]

EEEEXCELLEEENNNTT....my plan is slowly coming together.....

 

[kal]

Nice Steve. I'm still stealing your single tier wooden rig setup idea for my own electric setup.

Kal

 

[ScubaSteve]

You'll have a lot easier time with it if it's electric (assuming you know how to wire everything). A lot of my headscratching came from mounting burners and putting in heatshields.

 

[LooyvilleLarry]

Nice rig... I'll be building one of those very similar to that very soon ( SWMBO is gone over Christmas week ).

 

[EdWort]

Steve,

how do you like that ChillZilla?

 

[ScubaSteve]

Ed, it's pretty sweet. I'm happy I got it....I was worried about the cold break, but I just turned out one of my best IPA's ever; leaving the pellets free in the kettle (no bags) and crash cooling it all later. I just clogged the hell out of it with whole hops, but I just blasted those out and it's good as new. That'd never happen on a plate chiller. It cools fast, looks great, kinda pricey, but I think it's worth it if you're looking at a long-term piece of gear to put in a stand, etc.

 

[EdWort]

So you do not strain out the pellet hops? How long does it take to chill 10 gallons?

 

[GNBrews]

While the SS wire may stand up to the heat and weight strain, it's stealing probably close to 40% or more of your burner's heat. I think you'll see a dramatic increase in propane use unfortunately.

 

[ScubaSteve]

So you do not strain out the pellet hops? How long does it take to chill 10 gallons?

2 brews ago I did an APA and used 3 oz. of pellets. I just tossed them right in. I did a good whirlpool at the end, let them settle, and drained to the chiller. That was a 5 gal batch, and it dropped to 75-80 as fast as I could drain the kettle. It chills the wort immediately, you're just limited by how long it takes to fill the fermenter. It gives a hellaciously strong cold break, about 6 inches off the bottom, and that settled into a solid cake with the trub. I did use a highly flocculating yeast though. The beer had the best hop flavor I've had in my beers...I never realized how much my hop utilization suffered with paint strainers.

Now that I've actually clogged the chiller, I can see it has limits. I'd put some sort of coarse strainer in, but wouldn't worry about particulates.

Now, back to the rig !

I DID in fact have some big trouble with the shelving...more to come on that This build has gone in a slightly different direction...more pics to come

 

[BlindLemonLars]

It gives a hellaciously strong cold break, about 6 inches off the bottom, and that settled into a solid cake with the trub.

I was stunned by the amount of cold break since switching from an IC to a plate chiller! Even after settling awhile, it goes about a third of the way up the carboy. But like you say, it eventually settles down almost completely.

Must be the speed...instead of chilling the whole kettle volume slowly, you're bringing a small quantity of wort (that within the chiller at any given moment) down to cold temps very quickly.

 

[kal]

You'll have a lot easier time with it if it's electric (assuming you know how to wire everything). A lot of my headscratching came from mounting burners and putting in heatshields.

Yup - I followed your other thread pretty closely. For what it's worth, I thought you were pretty crazy making a propane/NG brew stand out of wood, but hey - we brewers aren't always the sanest bunch.

Kal

 

[ScubaSteve]

Yup - I followed your other thread pretty closely. For what it's worth, I thought you were pretty crazy making a propane/NG brew stand out of wood, but hey - we brewers aren't always the sanest bunch.

Kal

Ha! I'll take that as a compliment

 

[kal]

Not to take this off-topic but my understanding is that there's no issues with having the cold break in the primaries (6 gallon carboys) correct? I swear I read that somewhere here. If yes, and the cold break compresses nicely over time, why do some people try and keep the cold break out of the fermenters?

Kal

 

[ScubaSteve]

Let's take this discussion about the chillzilla and coldbreak, etc. over here: https://www.homebrewtalk.com/f11/how-unclog-chillzilla-92124/ I recently clogged the thing and also discuss it's use and benefits.

 

[ScubaSteve]

So, I've done quite a bit to the rig in the last few months......I added lots of awesome diamond plate! It's actually aluminum, 1/16" thick. I would have liked to have SS, but am pretty satisfied with it so far and it's really machineable which was a HUGE plus. You ever try to drill SS?

 

[ScubaSteve]

I used this configuration of SS parts (minus the fender washer) to secure the diamond plate to the bottom:

And it looks like this all tightened down:

And here's the bottom left side where I left a space for all my fancy plumbing to go to the pumps, etc. :