weathejx
Well-Known Member
(sorry for the cross post with DIY, but I wasn't getting any views/responses)
I have the ever popular SYL-2352 and two RTD probes, a 4" and a 50mm and I've got them wired up to the quick disconnects - all from Auber.
I was calibrating the PID and noticed that the probes read the temperature differently, to the tune of 4-5 degrees.
The 4" is reading 32-33 and the 50mm is reading 28-29.
Thoughts? Does it matter if the two red wires are reversed? I.E. maybe when attaching the QDs, i wired the 4" is wired 1-2-3 and the 50mm is wired 3-2-1?
Thanks!
I have the ever popular SYL-2352 and two RTD probes, a 4" and a 50mm and I've got them wired up to the quick disconnects - all from Auber.
I was calibrating the PID and noticed that the probes read the temperature differently, to the tune of 4-5 degrees.
The 4" is reading 32-33 and the 50mm is reading 28-29.
Thoughts? Does it matter if the two red wires are reversed? I.E. maybe when attaching the QDs, i wired the 4" is wired 1-2-3 and the 50mm is wired 3-2-1?
Thanks!