C cardiac_cadet002 Active Member Joined Jan 10, 2007 Messages 35 Reaction score 0 Aug 6, 2007 #1 Whats the ratio or DME per gallon when bottling?
homebrewer_99 Well-Known Member Joined Feb 1, 2005 Messages 19,581 Reaction score 1,219 Location I-80, Exit 27 (near the Quad Cities) Aug 6, 2007 #2 When priming with DME you use 1.25 (1 1/4) C of DME and 2 C water boiled for 5 mins for the entire 5 gals. Watch out for a boil over even with this small amount.
When priming with DME you use 1.25 (1 1/4) C of DME and 2 C water boiled for 5 mins for the entire 5 gals. Watch out for a boil over even with this small amount.
OP OP C cardiac_cadet002 Active Member Joined Jan 10, 2007 Messages 35 Reaction score 0 Aug 6, 2007 #3 I have a 3 gallon batch that I am looking to prime, would 3/4 be ok for this?
homebrewer_99 Well-Known Member Joined Feb 1, 2005 Messages 19,581 Reaction score 1,219 Location I-80, Exit 27 (near the Quad Cities) Aug 6, 2007 #4 Right: 1.25 / 5 = .25 *3 (gals) = .75 or 3/4 C...
McKBrew Well-Known Member Joined Oct 19, 2006 Messages 8,186 Reaction score 44 Location Hayden Aug 6, 2007 #5 Just in case you are interested in altering carbonation levels for different styles (definately not required), you could use the following link. http://hbd.org/cgi-bin/recipator/recipator/carbonation.html
Just in case you are interested in altering carbonation levels for different styles (definately not required), you could use the following link. http://hbd.org/cgi-bin/recipator/recipator/carbonation.html