So, this seems physically impossible, but it's been going on long enough that I figured I'd ask for some help.
I have two corny kegs hooked up to the same CO2 tank, but one of the beers is really carbonated and the other one seems to be getting flatter and flatter. They have both been hooked up for over a month, and the tank pressure isn't changing, so I don't think I have a leak. (Plus I did a soapy water test and found nothing.)
The gas line from the regulator is split, with the valves controlling each line completely open. The pressure is at about 8-10 psi, and the beer lines going to the tap are the same length.
Any ideas? What could I be missing? Thanks!
I have two corny kegs hooked up to the same CO2 tank, but one of the beers is really carbonated and the other one seems to be getting flatter and flatter. They have both been hooked up for over a month, and the tank pressure isn't changing, so I don't think I have a leak. (Plus I did a soapy water test and found nothing.)
The gas line from the regulator is split, with the valves controlling each line completely open. The pressure is at about 8-10 psi, and the beer lines going to the tap are the same length.
Any ideas? What could I be missing? Thanks!