• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Post your infection

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
seigex said:
Looks like post-krausen yeast that hasn't settled yet to me. It's only been in primary for a week, are your gravity readings consistent over three separate readings? What type of beer is this?

IPA , I only took an og reading which was 1.064. I thought it might be krausen yeast but wasn't sure Thanks for your help
 
IPA , I only took an og reading which was 1.064. I thought it might be krausen yeast but wasn't sure Thanks for your help

The benefit to a highly hopped IPA is the hop oils are naturally anti-septic and you are less likely to get an infection. My last IPA took about 2+ weeks to completely ferment. You have a long condition period to go for best flavor, so give it some time and it should drop out of suspension and settle with the trub. Otherwise, there are many people on this forum who are willing to take the beer off your hands if you feel it's infected! :)
 
seigex said:
The benefit to a highly hopped IPA is the hop oils are naturally anti-septic and you are less likely to get an infection. My last IPA took about 2+ weeks to completely ferment. You have a long condition period to go for best flavor, so give it some time and it should drop out of suspension and settle with the trub. Otherwise, there are many people on this forum who are willing to take the beer off your hands if you feel it's infected! :)


Thanks for the info I'm going to wait until next Monday to look at it again ill let you know how it taste
 
Normally I would just keg this and not even think about the floaties. But since I left Biermuncher's Cream of Three Crops in primary for about 3 months I'm slightly concerned.

It smells shockingly sweet, about to keg but thought I'd throw a picture on here and see what you think!

Is it infected or just yeast rafts or co2?

ForumRunner_20130310_161629.jpg
 
Does a sour mash with wild yeast/lacto from uncrushed grain count? Haha, I just opened up my first attempt at Berlinner Weiss last night with a couple buddies and nothing can prepare you for that funk. It seriously smelled like the Mexican carts in Chicago selling that mayonaisse covered elotes corn cobs mixed with my rugby rucking pads after a game. Smelled terrible, tasted tart and delicious.
 
Is this infected?

Infected with a gorgeous Krausen :)

Mind you it will get uglier as the yeast ejaculate all over the top of it.

Then as fermentation finishes.. it will fall to the bottom leaving a few little floaters.

At this point you shouldnt have to worry about infection. Just make sure the "seal" isn't broken until bottling time and your good.
 
Making my first attempt at fruit beer, cherry wheat. I put cherry puree in the secondary (and this is the picture). Is this just krausen forming in the secondary?
 
I was wondering what people's thoughts were. Just krausen forming in the secondary because of the fruit puree?

photo.JPG
 
That's kind of what my cherry beer looked like after about a week. Secondary on 1 can of Vintner's Harvest cherry puree. Here is what it looked like on bottling day after two weeks in secondary. And what it looks like in the bottles. FG before was 1.006 and after FG 1.007.

cherrybeer2.jpg


cherrybeer1.jpg
 
I think I had one due to not rinsing out the soap well enough.
The carbonation when poured went swoosh and was gone.
Tasted line vinegar
 
I tend to stay away from "soap" for that exact reason. Though given my track record lately, I'm not one to give advice on avoiding infections
 
Thanks for the pictures, Jethro. Interesting to see that much krausen floating at the top of your secondary after two weeks and that it didn't drop. How did the flavor turn out?
 
Thanks for the pictures, Jethro. Interesting to see that much krausen floating at the top of your secondary after two weeks and that it didn't drop. How did the flavor turn out?

The hydrometer sample tasted good... faint cherry flavor. I'll let you know in a few more days when I open a bottle.

Those were some large bubbles that would come and go over the last few days. They would form and burst through the day. I think it was due to slow CO2 outgassing into a film of hop or fruit oils. Saw a similar thing on a regular english brown ale (posted earlier in this thread). That one tastes fantastic.

Am interested to see another picture of yours as it progresses.
 
I skimmed the thread and couldn't see anything super flaky like this. It was an absurdly hoppy (ie expensive) American IPA. We were experimenting with late extract addition and didn't notice until afterward that one of our DME bags was torn open--probably the source of the infection. Anybody know what this is?

It tasted pretty delicious anyway so we went ahead and bottled it!

Edit: there was a LOT of this stuff accumulating in the blow-off tube, nothing really made it to the bucket at the end, though. There wasn't any growth I could notice after fermentation had subsided. Never racked to secondary since there was so much unidentified growth; just tasted some on a whim and decided to bottle.

uIhCh.jpg


Z33Oo.jpg


t8RiB.jpg
Wow
 
So this appeared in my RIS a couple days ago and has grown to this. I realize that its an infection I am just looking to identify it and figure out if it has ruined my RIS or if it's gonna be ok to bottle. Don't mind the floating chunks, those are bourbon barrel pieces.

Best picture I could get through the glass carboy.
KMndzqV.jpg
 
So this appeared in my RIS a couple days ago and has grown to this. I realize that its an infection I am just looking to identify it and figure out if it has ruined my RIS or if it's gonna be ok to bottle. Don't mind the floating chunks, those are bourbon barrel pieces.

Best picture I could get through the glass carboy.

Cool, I don't know what it is, but it's pretty.

It will be fine to bottle just make sure beyond reasonable doubt that your fg is stable first. I can't promise it will taste good. But I would definitely try it! I like a sour beer though.
 
I like sours too. The FG is def stable. This has been in the secondary for almost 2 months now and this just started forming
 
Believe I have an infection . Noticed after 3 weeks in secondary . Lots of bubbles ,build up on sides of Carboy and lots of particles floating .

image.jpg
 
I just realised infections only occur with open wounds...My noobness has made me question or fear infection for quite awhile but the truth is..it hardly happens..but for all these post of infection... In the name of the father the son and the holy spirit...dear god accept these dumpers and grace them with the holy spirit..allow them to continue to condition in the afterlife and strip them of there evil infections and in your name we pray amen
 
Just found this thread and in my 20 years of brewing never have I seen such gross images. Wow! Now, I can watch live surgeries on tv no prob but I find some of these images down right disturbing! Any one else find these repulsive?
 

Latest posts

Back
Top