Plugging the tube hole in kegerator

[hilljack13]

Ooops!

EDIT: I forgot to include another tip: Since it's the same base unit, if you want to minimize cycle times and get the longest life out of this unit: Set your temp control to work in Celius...Farenheit is an 'add-on' to a control board that actually operates in metric and as there are more increments in °F, it ends up cycling the compressor more often to try and maintain a finer temp range. Some early models cause a number of issues with over-cyling and prematurely burned out units....best take no chances.

I noticed the LED on the front alternates quickly from 32 to 34 and sometimes the condenser comes on for maybe 2-3 seconds. I assume what you say is why so gonna change to C. Thanks for the info!

 

[psehorne]

3D print my design

https://cults3d.com/en/3d-model/home/kegerator-bulkhead-cover-co2-line

Link didn't work for me.

 

[day_trippr]

Try it again - it worked for me (Chrome on W11P). I'd say this is the key pic on that page...

Cheers!

 

[Yesfan]

Ooops!

EDIT: I forgot to include another tip: Since it's the same base unit, if you want to minimize cycle times and get the longest life out of this unit: Set your temp control to work in Celius...Farenheit is an 'add-on' to a control board that actually operates in metric and as there are more increments in °F, it ends up cycling the compressor more often to try and maintain a finer temp range. Some early models cause a number of issues with over-cyling and prematurely burned out units....best take no chances.

Meant to do this before when I read about it but forgot. Thanks for the reminder. Changed mine to 5C (41F).

 

[psehorne]

Try it again - it worked for me (Chrome on W11P). I'd say this is the key pic on that page...

Thanks
..works tonight using the same Android tablet and browser as before.