solinvicta
Member
- Joined
- Feb 27, 2022
- Messages
- 15
- Reaction score
- 7
All right - kind of stumped. I added a glycol reservoir, and was able to fix fatal error #1 enough to brew a batch. But, turns out I had a small leak. Figured out the clamps to fix that and was able to run a full cleaning cycle. No leaks, but after sitting overnight, I'm getting the error again. I've taken it apart, gotten all the air out that I can (nothing obvious, and definitely nothing around the temperature probe), and put it back together. Still getting fatal error #1 ! This is with the same keg that I'd ran the cleaning cycle on, and it seems to be circulating fine, so I don't think that is the issue.