Oxidized NEIPA after closed transfer

[Unicorn_Platypus]

Can you explain this one, I don't get it??
I'm willing to try anything. I'm obsessed with making a stable Hazy IPA and the longest I've made it was 5 weeks before it starts to darken and gets a really nasty SWEET taste to it.

Doug basically answered the question.

If you want to buy some already cut gas diptubes you can purchase them from trong the inventor of the flotit and spundit

You can contact him via his website below

He doesn't have em listed on his website, but if you email him for em he can hook you up. Ask for the cut stainless steel gas dip tubes with epdm rubber o rings.

https://homebrewerlab.com/
[email protected]

To purge remaining sanitizer out the gas diptubes I like to hookup a picnic tap using a gas QD. Flip the keg upside down, tilt to the gas post and blow it out. Make sure the keg is still pressurized to 15 PSI

I also like to purge the picnic tap line with CO2 before hookup it up.

 

[vini_polesel]

Can you explain this one, I don't get it??
I'm willing to try anything. I'm obsessed with making a stable Hazy IPA and the longest I've made it was 5 weeks before it starts to darken and gets a really nasty SWEET taste to it.

I guess his idea about cutting the gas tube is for you to purge the remaining liquid/foam through gas port (jumper for liquid purge should be connected in gas “in” port instead of liquid “out” port) while you flip keg upside down. Very good idea!

Ps: Had not seen post above that says the same and don’t know how to delete mine.