No bubbles!

[BackyardHB]

I brewed a partial blonde yesterday morning and racked to my fermenter around 1230. I woke up this morning to find no active at all.
I do not believe there are any leaks.
I have the fermenter stored in my deep freeze at temp 68 or so. I racked the yeast to the wort at temp 78.
I used East Coast Ale.
What are my options if there are no bubbles by the time I get home from work? Can I re pitch another yeast?
Is this normal, almost 19 hours and no bubbles?

 

[sirhc1210]

Welcome!

I wouldn't worry about it yet. Fermentation can take 24-72hours to get started.

 

[Revvy]

1 day is not enough time to even begin to worry....after 72 hours is when you take a gravity reading and see what's going on. It's quite common for yeast to take 2-3 days to get going, it's called lag time.

https://www.homebrewtalk.com/f39/fermentation-can-take-24-72-hrs-show-visible-signs-43635/, and by visible signs we don't necessarily mean a bubbling airlock. it means gravity reading

It IS a sticky at the top of the beginners forum for a reason, afterall.


Airlock activity is irrevelent. Just gravity points on a hydrometer.
Airlock bubbling (or lack) and fermentation are not the same thing. You have to separate that from your mindset. Airlock bubbling can be a sign of fermentation, but not a good one, because the airlock will often blip or not blip for various other reasons...so it is a tenuous connection at best.

Fermentation is not always "dynamic," just because you don't SEE anything happening, doesn't mean that any-thing's wrong,, and also doesn't mean that the yeast are still not working diligently away, doing what they've been doing for over 4,000 years.

That's why you need to take a gravity reading to know how your fermentation is going, NOT go by airlocks, or size of krausen, or a calendar, the horoscope or the phases of the moon (those things in my mind are equally accurate).

The most important tool you can use is a hydrometer. It's the only way you will truly know when your beer is ready...airlock bubbles and other things are faulty.

The only way to truly know what is going on in your fermenter is with your hydrometer. Like I said here in my blog, which I encourage you to read, Think evaluation before action you sure as HELL wouldn't want a doctor to start cutting on you unless he used the proper diagnostic instuments like x-rays first, right? You wouldn't want him to just take a look in your eyes briefly and say "I'm cutting into your chest first thing in the morning." You would want them to use the right diagnostic tools before the slice and dice, right? You'd cry malpractice, I would hope, if they didn't say they were sending you for an MRI and other things before going in....

So wait til you hit the 72 hour mark THEN take a gravity reading. I predict that like 99.5% of ALL the threads like this, you will have a drop in gravity indicating fermentation is happening.

 

[BackyardHB]

1 day is not enough time to even begin to worry....after 72 hours is when you take a gravity reading and see what's going on. It's quite common for yeast to take 2-3 days to get going, it's called lag time.

https://www.homebrewtalk.com/f39/fermentation-can-take-24-72-hrs-show-visible-signs-43635/, and by visible signs we don't necessarily mean a bubbling airlock. it means gravity reading

It IS a sticky at the top of the beginners forum for a reason, afterall.

Airlock activity is irrevelent. Just gravity points on a hydrometer.
Airlock bubbling (or lack) and fermentation are not the same thing. You have to separate that from your mindset. Airlock bubbling can be a sign of fermentation, but not a good one, because the airlock will often blip or not blip for various other reasons...so it is a tenuous connection at best.

Fermentation is not always "dynamic," just because you don't SEE anything happening, doesn't mean that any-thing's wrong,, and also doesn't mean that the yeast are still not working diligently away, doing what they've been doing for over 4,000 years.

That's why you need to take a gravity reading to know how your fermentation is going, NOT go by airlocks, or size of krausen, or a calendar, the horoscope or the phases of the moon (those things in my mind are equally accurate).

The most important tool you can use is a hydrometer. It's the only way you will truly know when your beer is ready...airlock bubbles and other things are faulty.

The only way to truly know what is going on in your fermenter is with your hydrometer. Like I said here in my blog, which I encourage you to read, Think evaluation before action you sure as HELL wouldn't want a doctor to start cutting on you unless he used the proper diagnostic instuments like x-rays first, right? You wouldn't want him to just take a look in your eyes briefly and say "I'm cutting into your chest first thing in the morning." You would want them to use the right diagnostic tools before the slice and dice, right? You'd cry malpractice, I would hope, if they didn't say they were sending you for an MRI and other things before going in....

So wait til you hit the 72 hour mark THEN take a gravity reading. I predict that like 99.5% of ALL the threads like this, you will have a drop in gravity indicating fermentation is happening.

Thanks! Just a little impatient! This is my 30th or so batch and I have always noticed bubbles within the first day. Also I have never used this style of yeast before. Just want to make sure it's not me just the process. I will keep you posted and let you know how things are in the upcoming days! Thanks again!

 

[BackyardHB]

1 day is not enough time to even begin to worry....after 72 hours is when you take a gravity reading and see what's going on. It's quite common for yeast to take 2-3 days to get going, it's called lag time.

https://www.homebrewtalk.com/f39/fermentation-can-take-24-72-hrs-show-visible-signs-43635/, and by visible signs we don't necessarily mean a bubbling airlock. it means gravity reading

It IS a sticky at the top of the beginners forum for a reason, afterall.

Airlock activity is irrevelent. Just gravity points on a hydrometer.
Airlock bubbling (or lack) and fermentation are not the same thing. You have to separate that from your mindset. Airlock bubbling can be a sign of fermentation, but not a good one, because the airlock will often blip or not blip for various other reasons...so it is a tenuous connection at best.

Fermentation is not always "dynamic," just because you don't SEE anything happening, doesn't mean that any-thing's wrong,, and also doesn't mean that the yeast are still not working diligently away, doing what they've been doing for over 4,000 years.

That's why you need to take a gravity reading to know how your fermentation is going, NOT go by airlocks, or size of krausen, or a calendar, the horoscope or the phases of the moon (those things in my mind are equally accurate).

The most important tool you can use is a hydrometer. It's the only way you will truly know when your beer is ready...airlock bubbles and other things are faulty.

The only way to truly know what is going on in your fermenter is with your hydrometer. Like I said here in my blog, which I encourage you to read, Think evaluation before action you sure as HELL wouldn't want a doctor to start cutting on you unless he used the proper diagnostic instuments like x-rays first, right? You wouldn't want him to just take a look in your eyes briefly and say "I'm cutting into your chest first thing in the morning." You would want them to use the right diagnostic tools before the slice and dice, right? You'd cry malpractice, I would hope, if they didn't say they were sending you for an MRI and other things before going in....

So wait til you hit the 72 hour mark THEN take a gravity reading. I predict that like 99.5% of ALL the threads like this, you will have a drop in gravity indicating fermentation is happening.

@Revvy

Nice read regarding fermentation. This brings me to my next issue or question. I am a partial brewer and I can never get my OG dead on. For instance; I brewed a partial blonde yesterday that calls for a OG of 1.052 and when everything was said and done it only comes out to 1.041. I know you have to take into consideration the temp, which was 78 at the time of reading. Could this be the size of my kettle? I believe it's a 5 gallon but I have to add Almost 2 gallons of water to my fermenter before pitching the yeast. I also know that for ever hour of boil you lose about a gallon of water. Do you think by me added the 2 gallons this will effect the OG? What Options do I have? What can I do to ensure I get the correct OG reading? Could it also be the mash temp that I steep my grains?

 

[Revvy]

We get this question every day

It's a pretty common issue for ANYONE topping off with water in the fermenter (and that includes partial mashes, extract or all grain revcipes) to have an error in reading the OG...In fact, it is actually nearly impossible to mix the wort and the top off water in a way to get an accurate OG reading...

Brewers get a low reading if they get more of the top off water than the wort, conversely they get a higher number if they grabbed more of the extract than the top off water in their sample.

When I am doing an extract with grain recipe I make sure to stir for a minimum of 5 minutes (whipping up a froth to aerate as well) before I draw a grav sample and pitch my yeast....It really is an effort to integrate the wort with the top off water...This is a fairly common new brewer issue we get on here...unless you under or over topped off or the final volume for the kit was 5 gallons and you topped off to 5.5, then the issue, sorry to say, is "operator error"

More than likely your true OG is really what it's supposed to be. And it will mix itself fine during

 

[BackyardHB]

We get this question every day

It's a pretty common issue for ANYONE topping off with water in the fermenter (and that includes partial mashes, extract or all grain revcipes) to have an error in reading the OG...In fact, it is actually nearly impossible to mix the wort and the top off water in a way to get an accurate OG reading...

Brewers get a low reading if they get more of the top off water than the wort, conversely they get a higher number if they grabbed more of the extract than the top off water in their sample.

When I am doing an extract with grain recipe I make sure to stir for a minimum of 5 minutes (whipping up a froth to aerate as well) before I draw a grav sample and pitch my yeast....It really is an effort to integrate the wort with the top off water...This is a fairly common new brewer issue we get on here...unless you under or over topped off or the final volume for the kit was 5 gallons and you topped off to 5.5, then the issue, sorry to say, is "operator error"

More than likely your true OG is really what it's supposed to be. And it will mix itself fine during

I noticed you say "we", do you work or own a LHBS? Where are you located?

 

[Laughing_Gnome_Invisible]

"No Michael!" ~ Bubbles

 

[Pappers_]

I noticed you say "we", do you work or own a LHBS? Where are you located?

He means here at hbt.com, these forums. And his advice is spot on, I think.

 

[Pappers_]

"No Michael!" ~ Bubbles

Bubbles was a helluva dancer . . .

 

[Revvy]

I noticed you say "we", do you work or own a LHBS? Where are you located?

Pappers is right, this is one of those "issues" that pop up every days. It's one of those that often brings folks to this forum.