wobdee
Junior Member
So I have well water along with a softener, I sent out a sample after the softener and this is what they sent me. I brew mostly 2.5 gal batches of IPA's and APA's but want to get into some Lagers in the future.
I could use some advice on what kind of water treatments I should do? Thanks.
pH 7.4
Total Dissolved Solids (TDS) Est, ppm 83
Electrical Conductivity, mmho/cm 0.14
Cations / Anions, me/L 1.4 / 1.3
ppm
Sodium, Na 31
Potassium, K < 1
Calcium, Ca < 1
Magnesium, Mg < 1
Total Hardness, CaCO3 < 1
Nitrate, NO3-N < 0.1 (SAFE)
Sulfate, SO4-S 2
Chloride, Cl 4
Carbonate, CO3 < 1
Bicarbonate, HCO3 66
Total Alkalinity, CaCO3 54
"<" - Not Detected / Below Detection Limit
I could use some advice on what kind of water treatments I should do? Thanks.
pH 7.4
Total Dissolved Solids (TDS) Est, ppm 83
Electrical Conductivity, mmho/cm 0.14
Cations / Anions, me/L 1.4 / 1.3
ppm
Sodium, Na 31
Potassium, K < 1
Calcium, Ca < 1
Magnesium, Mg < 1
Total Hardness, CaCO3 < 1
Nitrate, NO3-N < 0.1 (SAFE)
Sulfate, SO4-S 2
Chloride, Cl 4
Carbonate, CO3 < 1
Bicarbonate, HCO3 66
Total Alkalinity, CaCO3 54
"<" - Not Detected / Below Detection Limit