wilfonzo
Well-Known Member
I'm starting my new brewery build. It is going to be a hybrid of sorts, I will be using the Brutus-20 method with a dedicated E-Herms heat exchanger using a 3 gallon corny keg. I started getting the electronics in, but I'm still looking for a control panel that I like.
I went with the cheaper JLD612's from lightobject.com, so I will have to change this diagram again.
The future HEX: the element will be through the bottom.
I'm still polishing the kegs... more pics and probably plenty of questions to come.
![aR9zv.jpg](https://proxy.imagearchive.com/d86/d8659ab7a87f122861267abb86910485.jpg)
I went with the cheaper JLD612's from lightobject.com, so I will have to change this diagram again.
![zrG2T.jpg](https://proxy.imagearchive.com/f96/f96cff66f0055543239d7d992a0e5ea8.jpg)
The future HEX: the element will be through the bottom.
![Msdzj.jpg](https://proxy.imagearchive.com/482/482f24ac3cbe64689d5e9f2dd63e7553.jpg)
I'm still polishing the kegs... more pics and probably plenty of questions to come.