KyleF318is
Well-Known Member
- Joined
- Aug 27, 2014
- Messages
- 68
- Reaction score
- 12
Looking for a HLT Keggle. Preferably in Texas area. Some great keggles on this site but shipping ruins the deal.
-
If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Keggles or Kegs with Top Cut off
- Thread starter KyleF318is
- Start date
Help Support Homebrew Talk:
jcc4507fly
Well-Known Member
- Joined
- Dec 27, 2012
- Messages
- 191
- Reaction score
- 17
I have a bottom draining keggle cut with (2) 1/2" bulkheads welded. One bulkhead close to bottom, and one bulkhead up high. Just needs a hole for an element and you'd be all set for electric. I will post pictures later if you're interested. I'm in the Houston area.
KyleF318is
Well-Known Member
- Joined
- Aug 27, 2014
- Messages
- 68
- Reaction score
- 12
Thanks. I'm building a 3 tier system with Burners so the electric doesn't work. I'm interested in anything especially since you're local! Thanks!
jcc4507fly
Well-Known Member
- Joined
- Dec 27, 2012
- Messages
- 191
- Reaction score
- 17
Something I was thinking about. You could use a tri-clamp with a 2"cap. I am pretty sure there are some high temp gasket options out there. Never tried direct heat on the ones I have though. If it would work you would be setup for bottom draining if you ever decided to go that route. Not trying to push this setup on you. Not even sure I really want to unload the keg. Just throwing out some ideas.
Similar threads
