Kegging noob line question

[BrewsCampbell]

For Christmas I got the ok to build a keezer from my SWMBO (yay!). I'm trying Frankenstein some stuff together as cheap as possible and have been scratching my head over beer lines and gas lines.

My plan is to have four taps in a keezer, three 10ft lines (12psi) and one 25ft line (25psi, or w/e soda and yummy hefe's are).

Is this line sufficient for both dispensing my beer and running my co2 in?

I have ball lock corneys and plan on using these disconnects for co2 and these liquid posts here.

I also plan on hooking up to this three-way distributor here.

Sorry for the barrage of questions, I just can't afford to order something incorrectly and have to purchase it again.

Thanks much!

 

[Yooper]

If you're going to have soda at 25 psi or so, you'll need a second primary regulator for the beer at 12 psi-ish.

 

[BrewsCampbell]

If you're going to have soda at 25 psi or so, you'll need a second primary regulator for the beer at 12 psi-ish.

Yuppers Yooper. I knew I'd leave something out, I have a shiny new dual regulator for this purpose. The three way is to hook up the other three taps.

 

[Yooper]

Yuppers Yooper. I knew I'd leave something out, I have a shiny new dual regulator for this purpose. The three way is to hook up the other three taps.

gotcha.

Everything else looks good, except for the beerline. You want 3/16"! NOT 1/4" ID.

I'd suggest getting one or two extra disconnects (both types) because if you take one apart, you can lose the o-ring and I always seem to have one that I can't get to work right. It's not crucial, just a helpful thought!