Kegerator Help

[nepats52]

I just purchased a Kegerator Conversion Kit with dual perlick faucets from KegConnection. I'm trying to convert my Magic Chef model # CTB1722GR refrigerator. Here's the questions I have:

Can I drill through the sidewall for the dual taps? I have looked online and there really isn't a good parts diagram that I could find. I just don't want to hit a coolant line.

If I have to go through the door what size beer lines do most people use? I have only 5 foot lines right now.

Thanks for your help.

 

[limoges]

If this is a full size fridge they usually put the lines in the back. If a bar fridge they are on the sides and possibly on the top also.

You should be able to feel the heat from touching the sides/top/back. If hot then there are some line there somewhere...

Don't know if this helps but here:

http://www.appliancepartspros.com/partsearch/model.aspx?model_id=48782&diagram_id=650814#d650814

it shows the condenser being a weird triangle.

 

[nepats52]

Thanks, It's an 18.4 cu ft. unit. I think the actual refrigerator part is 16.4 cu ft. I saw that diagram before. It doesn't really show where the lines run.