Quantcast

Kegerator draft tower.

HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Help Support Homebrew Talk:

Dave the Brewer

Well-Known Member
Joined
Sep 8, 2007
Messages
254
Reaction score
6
Location
Nederland, TX
I'm building a tower for my soon to be kegerator, what is the standard bolt patten on the base? How far apart are the bolt holes from each other, and bolt hole size? I would like to drill the holes once in case one day I buy one. Anyone help is appreciated.

P.S. if you measure the distance from hole to hole measure from center to center please.;)
 

missing link

Well-Known Member
Joined
Jul 2, 2007
Messages
650
Reaction score
4
Location
Highland, MI
unfortunately they aren't all the same. I started with a single tap and when I went to a dual tap set up I had to re-drill my mounting holes for a larger diameter.

I would say buying the tower first would be good, or if you plan on buying from Micromatic, they will tell you the hole patern. www.micromatic.com

Linc
 
OP
Dave the Brewer

Dave the Brewer

Well-Known Member
Joined
Sep 8, 2007
Messages
254
Reaction score
6
Location
Nederland, TX
I had looked on Micromatic I never saw any bolt patterns, if you could send a direct link. I still can't find them.
 
Top