Intertap Growler Solution?

[jeeppilot]

Has anyone come up with a good solution for Intertap faucets to fill a growler? I have the screw in adapters but I’m not a fan of those. I’ve lost several of the little black o-rings, and it’s just a hassle to have the extra pieces, in and out. I’ve only found one style of slip in adapter and have heard nothing good about it. Someone has to make a well fitting slip in growler adapter.

 

[BBBF]

I know you can get them in Australia.


https://www.kegland.com.au/intertap-push-in-growler-filler-spout.html

Aliexpress option
https://www.aliexpress.com/item/INTERTAP-PUSH-IN-GROWLER-SPOUT-ATTACHMENT/32899745494.html?

 

[imasickboy]

Thin wall silicone tubing. Slip it over the spout, not in.

https://www.amazon.com/gp/product/B000FOWGGW/

 

[jeeppilot]

Thin wall silicone tubing. Slip it over the spout, not in.

https://www.amazon.com/gp/product/B000FOWGGW/

Can’t say it’s elegant but hey it works! Even better, the piece of tubing I’ve been filling growlers with is the same stuff so I don’t even have to go buy any. I’m just a little concerned about how easily it’s going to slip off the faucet nozzle if I’m not paying real close attention.

 

[imasickboy]

Can’t say it’s elegant but hey it works! Even better, the piece of tubing I’ve been filling growlers with is the same stuff so I don’t even have to go buy any. I’m just a little concerned about how easily it’s going to slip off the faucet nozzle if I’m not paying real close attention.

Put it in dry, and it'll be a long time until it happens again.

Put it on dry, and you should be okay.

 

[day_trippr]

Naughty

 

[Ozarks Mountain Brewery]

Thin wall silicone tubing. Slip it over the spout, not in.

this is what I do and it works fine just turn the pressure down real low

 

[jeeppilot]

Alright. It does work...just seems like with all the $$ to be made on brewing stuff, somebody would have built one that actually fits by now. That’s what I get for not buying Perlick!