goodgreener
Well-Known Member
So I have an immersion chiller. I am not so impressed with it, the time it takes to cool the wort. The other day I put it in a bucket of ice water and boiled water on the stove. I melted my auto siphon siphoning from the pot to the chiller but the water coming out of the chiller was like ~60f. So I have a new set up and I am wondering if you guys have tried this or if you may have any helpful comments. I plan on getting a faucet installed on a steel pot but for now this is my idea. I have connected tubing to my priming bucket, from there to my chiller in another bucket and the output will go to a fermenter. My plan is to put like 2 gallons or so of cold water in the priming bucket and pour the wort in it after the boil. Then I will open the tap and flow the wort through the chiller and into the fermenter. Look at the pictures...