I'm looking to make a Rye IPA

[EdWort]

I'm going to make an experimental batch of Rye IPA, so I'm now starting to formulate a recipe. I have about 14 lbs of Rye so I thought I would use a couple and make a batch. Here's what hops I have to work with.

Amarillo
Warrior
Chinook
Cascade
Tettnanger
Northern Brewer
Perle
Centennial

I figure on Pale for base, a couple pounds of rye, a pound of wheat, some crystal 20L, and maybe some vienna (since I have it).

Any suggestions on a hop bill?

 

[brewt00l]

Take a peek at what's perhaps the most repeated rye IPA recipe from the webby:

http://www.brew-monkey.com/recipes/html/connsryeipa.htm

I have brewed it and can vouch for it's tasty factor.

 

[RICLARK]

I'm going to make an experimental batch of Rye IPA, so I'm now starting to formulate a recipe. I have about 14 lbs of Rye so I thought I would use a couple and make a batch. Here's what hops I have to work with.

Amarillo
Warrior
Chinook
Cascade
Tettnanger
Northern Brewer
Perle
Centennial

I figure on Pale for base, a couple pounds of rye, a pound of wheat, some crystal 20L, and maybe some vienna (since I have it).

Any suggestions on a hop bill?

What do you think about a butt load of Cent and Cascade? Or would that be to generic to what you want?

 

[EdWort]

I would like to use some of my Amarillo, Cascade or Chinook. Inventory is good on those.

I've looked at Denny's, but don't have any Columbus.

 

[MikeFlynn74]

Brewtopia has a few you should look at.

 

[Short Drive]

Are you going for a big hop flavor and aroma? Or do you want some of the rye coming through?

The first thing that comes to mind is the three C's. But that is too "been done". But I do love the flavor combination. Especially dry hopping with Cascade and Centenial.

 

[brewt00l]

I would like to use some of my Amarillo, Cascade or Chinook. Inventory is good on those.

I've looked at Denny's, but don't have any Columbus.

But you have chinook, which you could sub. I would just use his grain bill and make whatever hop subs you want.

 

[PseudoChef]

Here's my recipe as well, although the hopping would be different.

I like the Magnum (use the Warrior) bittering. Super neutral, you really want the spice from the rye to help contribute to the perceived bitterness. In this regard, I would try to limit late-hopping, but don't exclude it entirely. You do want some floral notes in there. I'm an Amarillo whore, so dry-hopping with those I really enjoyed.

If I had to change my recipe up, I'd exclude the English hops...they don't come through. Keep us posted on what you come up with.

 

[Professor Frink]

I would definitely use some Amarillo in there, I think that would work great.

 

[EinGutesBier]

I'm going to make an experimental batch of Rye IPA, so I'm now starting to formulate a recipe. I have about 14 lbs of Rye so I thought I would use a couple and make a batch. Here's what hops I have to work with.

Amarillo
Warrior
Chinook
Cascade
Tettnanger
Northern Brewer
Perle
Centennial

I figure on Pale for base, a couple pounds of rye, a pound of wheat, some crystal 20L, and maybe some vienna (since I have it).

Any suggestions on a hop bill?

I'm thinking 1 ounce of Chinook for bittering, .75 ounces of Cascade for flavor and another .5 or .75 of Cascade for aroma. Just one idea. I'm trying to think what'd compliment the flavor of the rye. Maybe get some Warrior involved on this as well. Finally, maybe some Tettnanger would do a nice job for aroma or flavoring...a 50/50 mix with the Cascade. Heh, RyePA.

 

[scottthorn]

I was trying to make a Rye Imperial IPA along the lines of Bittersweet Lenny's. Unfortunately I ended up with horrendous efficiency so the end result is a nice non-imperial Rye IPA. Here was the recipe I followed for a 5 gallon batch:

12lbs 2-row
5lbs flaked rye
1lb of raw unmalted red wheat
1lb of Biscuit (maybe less)
and some Crystal for color and sweetness to balance the hops.

Hopping will be a three-pronged attack with 4oz each of Centennial, Cascade and Amarillo

It is very tasty!

IIRC, I used one ounce of each for additions at 60, 15, 5, then 2 weeks of dry-hopping

 

[TexLaw]

I like spicier or more floral hops with my ryes, si would go with the Tetnnanger, Perle, or Northern Brewer. However, if you are trying to work with what you have a lot of, those C hops and Amarillo do work well.


TL

 

[niquejim]

I would like to use some of my Amarillo, Cascade or Chinook. Inventory is good on those.

I've looked at Denny's, but don't have any Columbus.

Lately I've been doing all my beer(most) with
FWH with a variety I like the flavor of
60 min bittering
10 min flavor
0 min steeping
DH

so for your beer I would
FWH Amarillo and Chinook
60 Whatever has highest AA%
10 Blend of the 3
0 cool to 180 steep a blend of the 3 or just cascade for 30 min
DH blend of the 3

then try to keep IBU's balanced with the OG

 

[blacklab]

For my two cents, Amarillo is like bacon. Itsa good witha everything! I almost always dry hop my IPA's with it.

I looked up Red Hook Rye online and found that they use Hersbucker and Mt Hood in their version-obviously neither was in your list but maybe you could get away with Tettnanger/Cascade for a similiar effect.

 

[RICLARK]

1 oz Chinook 13% 60 min
.5 oz Chinook 13% 45 min
1 oz Cascade 5% 30 min
.5 oz Cascade 5% 15 min
.5 oz amarillo 10% 5 min
.25 oz amarillo 10% dry hop

how does this look?

 

[EdWort]

Thanks for all the input! Keep it coming.

 

[s3n8]

I am planning an extract rye IPA as my next (5th) batch...

7.5 lbs Pale LME
1 lb Amber DME
1 lb Crystal 120
1 lb Flaked Rye

Steep Crystal and Rye at 155 for 30 - 60 minutes

Havent 100% decided on the hop schedule yet, but I plan on using 2oz Columbus and 2oz Cascade. Was thinking:

1oz Columbus @ 60
1oz Columbus @ 20
1oz Cascade @ 10
1oz Cascade @ 1

Any thoughts on the above? Feedback appreciated.

 

[RICLARK]

1 oz Amarillo 10% 60 min
.5 oz Amarillo 10% 45 min
.5 oz Amarillo 10% 30 min
.5 oz Amaillo 10% 15 min
1 oz Cascade 5% 5 min
.25 oz Chinook 13% dry hop
.5 oz Cascade 5% Dry Hop

 

[zoebisch01]

I like spicier or more floral hops with my ryes, si would go with the Tetnnanger, Perle, or Northern Brewer. However, if you are trying to work with what you have a lot of, those C hops and Amarillo do work well.


TL

I second that. I recently made one with Summit and Simcoe. It works swell. The Amarillo and Cascade would be very similar.

 

[zoebisch01]

I am planning an extract rye IPA as my next (5th) batch...

7.5 lbs Pale LME
1 lb Amber DME
1 lb Crystal 120
1 lb Flaked Rye

Steep Crystal and Rye at 155 for 30 - 60 minutes

Havent 100% decided on the hop schedule yet, but I plan on using 2oz Columbus and 2oz Cascade. Was thinking:

1oz Columbus @ 60
1oz Columbus @ 20
1oz Cascade @ 10
1oz Cascade @ 1

Any thoughts on the above? Feedback appreciated.

I use the Colombus/Cascade combo in my APA and love it. That 2 oz of Colombus might be a little too much, verify your IBU. I'd personally keep the flavor addition down to the 1/2 oz level and up the Cascade to compensate.

 

[BierMuncher]

Any suggestions on a hop bill?

Here's what I did about 4 weeks ago:

Rye Not? India Pale Ale

[5-Gallon Batch]
Batch Size: 6.00 gal
Boil Size: 8.08 gal
Estimated OG: 1.066 SG
Estimated Color: 8.7 SRM
Estimated IBU: 53.5 IBU
Brewhouse Efficiency: 68.0 %
Boil Time: 90 Minutes



1.00 lb Rice Hulls (0.0 SRM) Adjunct 5.9 %
10.00 lb Pale Malt, Maris Otter (3.0 SRM) Grain 58.8 %
2.00 lb Rye Malt (4.7 SRM) Grain 11.8 %
1.50 lb Munich Malt (9.0 SRM) Grain 8.8 %
1.50 lb Vienna Malt (3.5 SRM) Grain 8.8 %
1.00 lb Caramel/Crystal Malt - 20L (20.0 SRM) Grain 5.9 %

0.50 oz Columbus (Tomahawk) [13.50%] (90 min) (FiHops 23.0 IBU
0.50 oz Columbus (Tomahawk) [13.50%] (40 min) Hops 17.2 IBU
0.50 oz Amarillo Gold [8.90%] (20 min) Hops 7.8 IBU
0.50 oz Cascade [7.80%] (10 min) Hops 3.7 IBU
1.00 oz Summit [16.50%] (1 min) Hops 1.9 IBU
0.50 oz Amarillo Gold [8.90%] (0 min) (Aroma Hop-Hops -

1.00 oz Centennial [9.50%] (Dry Hop 14 days) Hops -
1.00 oz Summit [16.50%] (Dry Hop 14 days) Hops

During the second week of dry hopping, I added 1 ounce of oak chips. Smells fantastic. I plan to leave in the keg for 1-2 months, then bottle and stash for another month or two.

 

[s3n8]

I use the Colombus/Cascade combo in my APA and love it. That 2 oz of Colombus might be a little too much, verify your IBU. I'd personally keep the flavor addition down to the 1/2 oz level and up the Cascade to compensate.

But they come in 2 oz bags, so I feel obligated

I thought about mixing 1oz of columbus in with the 2 oz cascade and doing a DFH style continuous hop over the last 20 minutes.

 

[Poobah58]

I'm thinking:
Amarillo (FWH) 15 IBU
Chinook (60 min) 35 IBU
Perle (30 min) 16 IBU
Perle (10 min) 8 IBU
Perle (0 min)
Amarillo (Dry Hop 21 days)

Very similar to my Imperial Rye IPA!

 

[niquejim]

Thanks Ed

I've been thinking of doing an IPA and you made me decide to change.

https://www.homebrewtalk.com/showthread.php?t=60939

 

[niquejim]

So Edwort what did you come up with, or are you still thinking.

 

[Poindexter]

Amarillo
Warrior
Chinook
Cascade
Tettnanger
Northern Brewer
Perle
Centennial

I figure on Pale for base, a couple pounds of rye, a pound of wheat, some crystal 20L, and maybe some vienna (since I have it).

Any suggestions on a hop bill?

I like spicy with rye. A little black pepper, maybe I'll read some old BrewPastor threads to get some chili pepper ideas next time.

By all means look over First Wort Hop recipe biermuncher has in the recipe section.

That said I think I love Amarillo in IPAs. I love Chinook in anything ( I wish they would make a lady's perfume out of that stuff when the shortage is over), and I would take a big whiff of the NB/ Perle next.

The Tett I personally would save for German styles, my third ever lager is in primary right now. The Cascade and Centennial I would save for APAs. I am neutral on the Warrior. I might save it for bittering to stretch "my" Cascade and Centennial.

 

[EdWort]

So Edwort what did you come up with, or are you still thinking.

Still thinking and doing HoneyDoos.

 

[niquejim]

I understand, I have more HoneyDoos than avaiable brew days. That is why I just picked up a 80qt pot. Maybe I can brew more, less often.

 

[8string]

Im thinking of going with Northern Brewer and Hallarteau. With a scaled down version of Denny's Rye Malt bill. (I have to make it fit in my cooler). So I guess that will make it more of a Rye Pale Ale not IPA.

 

[BierMuncher]

Im thinking of going with Northern Brewer and Hallarteau. With a scaled down version of Denny's Rye Malt bill. (I have to make it fit in my cooler). So I guess that will make it more of a Rye Pale Ale not IPA.

If your cooler is going to get cramped....you definitley want to think about tossing in a 1/2 pound of rice hulls to keep the grain bed fluffed up and prevent a stuck sparge.