I need help with my 2 corni kegs

[fishbaitz]

i bought everything i need i just dont know how the hell to put it together i cant find a clear guide

 

[shortyz]

its called youtube. lots there.

 

[sailWickedFast]

Yeah, there isn't much available. I just did a couple of quick searches since I like draft beer and knew I wasn't alone (obviously). Just get a beer line, gas line and CO2 source (injector/cartridges or tank) and you should be all set. I'm having trouble trying to get the procedures of the recipe clear, however. Good luck!

 

[Pkrd]

A good intro:
http://www.northernbrewer.com/documentation/Kegging.pdf

And theres a bunch of links in the sticky here
https://www.homebrewtalk.com/showthread.php?t=43347

 

[Cider123]

kegconnection has some videos too on installation. I recommend their kits for folks starting out. They make it easy and their reputable.

 

[microbusbrewery]

Gas side: regulator attaches to CO2 tank, gas supply hose attaches to regulator, gas disconnect attaches to hose and gas keg post.
Liquid side: liquid disconnect attaches to liquid keg post and liquid line, liquid line connects to tap, glass goes under tap. Set kegerator to about 40F, CO2 to about 12PSI, and use about 10 feet of 3/16" line for the liquid. That's about all there is to it.