I give you THE BEAST

[BadHorsie]

Awesome rig!

 

[azredneck]

What bender and flare tool would you recommend?

I bought a bender made by Imperial and it worked well. I believe Ridgid just came out with a new tube bender series that works well with stainless. There are a few more benders out there that are all good quality. They usually note if they can bend stainless tubing and beware of the cheapies. They are guaranteed to turn your pricey new tube into scrap metal even if they say they can bend stainless.

 

[johnclark]

How is the rig holding up to a few years of use? I built a gravity setup a few years back and am upgrading constantly, but want to build a new setup with hard lines and pumps.
What regulator do you use to run all your burners with 1 tank, I have to use 2 tanks with high pressure regs to run all 3 at once.

 

[azredneck]

How is the rig holding up to a few years of use? I built a gravity setup a few years back and am upgrading constantly, but want to build a new setup with hard lines and pumps.
What regulator do you use to run all your burners with 1 tank, I have to use 2 tanks with high pressure regs to run all 3 at once.

So far I only had to clean out the pump impeller. Looked like a piece of plastic made it in there...

Besides that and a few modifications, everything has been flawless! Great beer and getting faster every time.

The regulator I am using can fire up all of my big ass burners with no problems at the same time. Find a propane vendor that has parts for everything beyond bbq's and turkey fryers. I attached a couple pics in case you can find it on the Internet. I found an adjustable regulator that pumps out far more gas than I can use. I am thinking you can save your money on adding the gauge as I am not sure I have ever used it. Your real gauge is flame height anyway

 

[johnclark]

Thanks for the info.

 

[skadalajara]

AZRedNeck:
Awesome setup.

Also, did you go by the name "D00d" in a previous life, by any chance? Your avatar looks familiar to me for some reason.

 

[cincyjrod]

Freaking Awesome! Don't ever advertise brew day at your house on here. People will be flying in.

Nice! :cross:

 

[azredneck]

AZRedNeck:
Awesome setup.

Also, did you go by the name "D00d" in a previous life, by any chance? Your avatar looks familiar to me for some reason.

Nope. Just that one. Playing with a machine gun in that pic

 

[azredneck]

Freaking Awesome! Don't ever advertise brew day at your house on here. People will be flying in.

Nice! :cross:

Thanks !

 

[splobucket]

Im starting my brew rig tomorrow... very excited. Since everything is hard piped, how do you go about cleaning your vessels? What gauge metal did you use?