How do I extend the hose on a t tower?

[maseline_98]

I bought a T Tower and it came with about 2 ft on hose attached. How do I extend the hose? Excuse the no one as of me. Is there a coupler that goes hex screw to hex screw I can buy or can I just cut the hose attaches in the t tower and hook up my hose coming from the keg using a hose clamp?

 

[maseline_98]

 

[day_trippr]

Those lines look disgusting. I would definitely replace them.

As they appear to be factory-crimped lines, you'll need to remove the line from the tail piece and toss the assembly in the trash bin.
Then buy a matching 90° swivel nut/barb assembly for that end like this

and a straight swivel nut/barb assembly for the keg coupler end, and at least 10' of 3/16" ID beer line to put between them...

Cheers!

 

[maseline_98]

This is my current setup...don't mind the drywall dust...I recently bought the t tower on ebay...I thought there might have just been coupler I could have bought but I will take a look around for yoyr solution.

 

[maseline_98]

Could I this?....

 

[day_trippr]

You could salvage the keg coupler ends, the newer pics show they're barbed and clamped. Then you just need 10' of 3/16" ID beer line per tap and the 90° flare fittings and you'll have nice clean lines long enough to work...

Cheers!