Mrsupraboy
New Member
- Joined
- Dec 8, 2013
- Messages
- 4
- Reaction score
- 0
Hey guys new to the world of home brew. Bought a kegorator and some used postmix kegs. At 1st the pressure. On the co2 regulator was dropping cause I had bad reconditioned kegs. Now that I found the problem and I'm pretty sure I fixed them. The regulator is still going down a bit.
On the regulator I have to manual valves to shut the lines of to the kegs. So what is happening is I set the gauge to 40 psi and within an hour it drops to 38. But once I close the line of to the bottle the pressure rises. Then I open the manual valve and it goes back to where it was(38)(originally set 40). So I adjust it back up to 40psi. I've thrown spray and wipe all over the top and can't see any more leaks.
Is the dropping of pressure normal. Or do I still have a leak. Please help.
On the regulator I have to manual valves to shut the lines of to the kegs. So what is happening is I set the gauge to 40 psi and within an hour it drops to 38. But once I close the line of to the bottle the pressure rises. Then I open the manual valve and it goes back to where it was(38)(originally set 40). So I adjust it back up to 40psi. I've thrown spray and wipe all over the top and can't see any more leaks.
Is the dropping of pressure normal. Or do I still have a leak. Please help.